VARTM 工艺中高渗透导流介质对树脂充填行为的影响
DOI:
作者:
作者单位:

作者简介:

通讯作者:

中图分类号:

基金项目:

国家自然科学基金资助项目(51263015);江西省自然科学基金资助项目(20122BAB206011)


Effects of High-Permeability Medium on Resin Filling Behavior in Vacuum Assisted Resin Transfer Molding Process
Author:
Affiliation:

Fund Project:

  • 摘要
  • |
  • 图/表
  • |
  • 访问统计
  • |
  • 参考文献
  • |
  • 相似文献
  • |
  • 引证文献
  • |
  • 资源附件
  • |
  • 文章评论
    摘要:

    采用可视化流动实验装置,系统研究了高渗透导流介质对真空辅助树脂传递模塑(VARTM)工艺中树脂充填流动行为的影响。实验结果表明,高渗透导流介质只覆盖部分纤维增强体时,铺放在靠注胶端导流效果明显,铺放在靠抽气端导流效果很弱;高渗透导流介质铺放在纤维增强体顶、中和底面任何位置,都会起到良好的导流效果,尤其是铺放在纤维增强体底面时导流效果最好;随着高渗透导流介质层数增加,对树脂充填的导流作用就越好;随着纤维增强体层数的增多,完成充填所需时间就越长,这表明高渗透导流介质导流效果受到增强体厚度的影响。

    Abstract:

    Through visual resin flow experiment, the influence of high-permeable medium on the resin flow behavior in vacuum assisted resin transfer molding(VARTM)process was systematically studied. Experimental results show that, with the high-permeable medium placed near the inlet side, the diversion effect is obvious; while with it placed next to the outlet side, the diversion effect is less impressive. No matter where the high-permeability medium is placed in the fiber reinforcement, it can play a good distribution effect, particularly when it’s placed under the reinforcement; The more the layers of high-permeable medium, the better the diversion effect; As the thickness of the reinforcement increases, the infusion time increases, indicating that the diversion effect is affected by the thickness of reinforcement.

    参考文献
    相似文献
    引证文献
引用本文

赖家美,王德盼,陈显明,柳和生. VARTM 工艺中高渗透导流介质对树脂充填行为的影响[J].高分子材料科学与工程,2014,30(7):120-125. Jiamei Lai, Depan Wang, Xianming Chen, Hesheng Liu. Effects of High-Permeability Medium on Resin Filling Behavior in Vacuum Assisted Resin Transfer Molding Process[J]. Polymer Materials Science & Engineering,2014,30(7):120-125.

复制
文章指标
  • 点击次数:
  • 下载次数:
  • HTML阅读次数:
  • 引用次数:
历史
  • 收稿日期:
  • 录用日期:
  • 网络出版日期:
  • 在线发布日期: 2014-07-14
  • 出版日期:
您是第      位访问者
编辑出版 :《高分子材料科学与工程》编辑部
地址 :四川省成都市一环路南一段24号 四川大学高分子研究所
电话 :028-8540 1653  E-mail:gfzclbjb@vip.sina.com
高分子材料科学与工程 ® 2026 版权所有
技术支持:北京勤云科技发展有限公司