Abstract:An advanced amorphous thermosetting resin without nanophase separation was synthesized by directly casting the diglycidyl ether of bisphenol A (DGEBA) epoxy resin cured by α, ω-bisaminophenyl terminated poly(ethylene glycol) (BATPE) and phenethylamine (PEA). The stress-strain curves, dynamic mechanical thermal analysis and morphologies of impact fracture surfaces of the cured products were investigated as functions of flexible poly (ethylene glycol) segment molecular weight (MPE) without changing the content of the flexible polyether segment. The results show that the homogeneous epoxy resin without nanophase separation is available by incorporating poly (ethylene glycol) segments into epoxy crosslinked networks via chemically linking with DGEBA, beneficial for increasing strain relax rates. When MPE is extended, the glass transition temperature, the room-temperature Young’s modulus and tensile strength of the cured products decrease while toughness, elongation increase. When MPE=600, the impact strength of PEA/BATPE-DGEBA increases 154.32% than that of PEA-DGEBA, and the yield point appears in the stress-strain curves, showing a typical ductile fracture.