两亲聚合物乳状液的渗流特性
DOI:
作者:
作者单位:

作者简介:

通讯作者:

中图分类号:

基金项目:

国家自然科学基金资助项目(20873181,21273286)


Characterization of Amphiphilic Polymer O/W Emulsion Through Porous Media
Author:
Affiliation:

Fund Project:

  • 摘要
  • |
  • 图/表
  • |
  • 访问统计
  • |
  • 参考文献
  • |
  • 相似文献
  • |
  • 引证文献
  • |
  • 资源附件
  • |
  • 文章评论
    摘要:

    通过渗流对比实验得到了两亲聚合物乳状液体系的渗流特性,进而揭示了两亲聚合物乳状液体系的渗流规律。两亲聚合物乳状液体系在渗流过程中产生较强的粘弹效应,且聚合物无规线团对乳化油滴的卡堵及流动有很大的影响,因此与两亲聚合物溶液和表面活性剂乳状液体系对比,两亲聚合物乳状液体系的渗流阻力较大,并有明显的“爬坡式”波动现象。探讨了两亲聚合物乳状液体系渗流的影响因素,结果表明,油滴粒径越大,两亲聚合物乳状液体系的渗流阻力越大且波动越明显。注入速度的增加不仅会增强两亲聚合物溶液在多孔介质中的粘弹性,而且也使两亲聚合物乳状液渗流阻力增大且波动性愈加明显。

    Abstract:

    The flow behavior of amphiphilic polymer emulsion system in porous media was evaluated using core flooding tests. The results show that the emulsion system has strong viscoelasticity during its transport through porous media, and the retention and flowing condition of emulsified oil drop is strongly affected by the polymer random coil. Comparing to surfactant emulsion, the polymer emulsion shows high flow resistance and its injection pressure exhibits a crawling fluctuation increase. The factors that affected the flow resistance of amphiphilic polymer emulsion system were also investigated. The results show that the flow resistance of the emulsion system increases with increase of emulsified oil droplet and flow rate, both of which results in more obvious fluctuant of injection pressure.

    参考文献
    相似文献
    引证文献
引用本文

康万利,魏绍龙,季岩峰,赵昊阳,赵 健,杨润梅.两亲聚合物乳状液的渗流特性[J].高分子材料科学与工程,2014,30(8):76-80. Wanli Kang, Shaolong Wei, Yanfeng Ji, Haoyang Zhao, Jian Zhao, Runmei Yang. Characterization of Amphiphilic Polymer O/W Emulsion Through Porous Media[J]. Polymer Materials Science & Engineering,2014,30(8):76-80.

复制
文章指标
  • 点击次数:
  • 下载次数:
  • HTML阅读次数:
  • 引用次数:
历史
  • 收稿日期:
  • 录用日期:
  • 网络出版日期:
  • 在线发布日期: 2014-08-20
  • 出版日期:
您是第      位访问者
编辑出版 :《高分子材料科学与工程》编辑部
地址 :四川省成都市一环路南一段24号 四川大学高分子研究所
电话 :028-8540 1653  E-mail:gfzclbjb@vip.sina.com
高分子材料科学与工程 ® 2026 版权所有
技术支持:北京勤云科技发展有限公司