熔喷非织造用PHBV/PLA 共混体系的结构与相容性
DOI:
作者:
作者单位:

作者简介:

通讯作者:

中图分类号:

基金项目:

浙江省自然科学基金项目(LY12E03006);国家自然科学基金资助项目(51203141);“产业用纺织材料技术”浙江省重点科技创新团队项目(2011R50003);浙江省高校重中之重学科开放基金资助(2013YXQN08)


Structure and Miscibility of Poly(3-Hydroxybutyrate-co-3-Hydroxyvalerate) and Poly(Lactic Acid) Blends for Melt-blown Nonwovens
Author:
Affiliation:

Fund Project:

  • 摘要
  • |
  • 图/表
  • |
  • 访问统计
  • |
  • 参考文献
  • |
  • 相似文献
  • |
  • 引证文献
  • |
  • 资源附件
  • |
  • 文章评论
    摘要:

    通过熔融共混法制备了不同比例的熔喷用聚(3-羟基丁酸-co-3-羟基戊酸共聚酯)/聚乳酸(PHBV/PLA)共混材料。用差示扫描量热法、动态热力学法、X射线衍射法和红外光谱法分别对PHBV/PLA 共混体系的相容性进行了研究,并用扫描电镜观察了共混体系的相分布形态。研究表明,PHBV/PLA共混体系中两组分总体不相容,PLA对PHBV 的结晶具有稀释作用,但不改变其晶型;随着共混比例的变化,共混体系呈现不同的相分布形态。

    Abstract:

    Poly(3-hydroxybutyrate-co-3-hydroxyvalerate) (PHBV) and poly(lactic acid)(PLA) blends were prepared at different compositions by melting mixing. Their miscibility and morphology were investigated by differential scanning calorimetry (DSC), dynamic mechanical analysis (DMA), X-ray diffraction (XRD), Fourier transform infrared spectroscopy (FT-IR) and scanning electron microscope (SEM). The results indicate that PHBV and PLA are almost immiscible, PLA dilute the crystallization but does not change the crystal type of PHBV, and PHBV/PLA blends represent different morphology with change of compositions.

    参考文献
    相似文献
    引证文献
引用本文

朱斐超,于 斌,韩 建,丁新波,周冠辰.熔喷非织造用PHBV/PLA 共混体系的结构与相容性[J].高分子材料科学与工程,2014,30(8):81-84. Feichao Zhu, Bin Yu, Jian Han, Xinbo Ding, Guanchen Zhou. Structure and Miscibility of Poly(3-Hydroxybutyrate-co-3-Hydroxyvalerate) and Poly(Lactic Acid) Blends for Melt-blown Nonwovens[J]. Polymer Materials Science & Engineering,2014,30(8):81-84.

复制
文章指标
  • 点击次数:
  • 下载次数:
  • HTML阅读次数:
  • 引用次数:
历史
  • 收稿日期:
  • 录用日期:
  • 网络出版日期:
  • 在线发布日期: 2014-08-20
  • 出版日期:
您是第      位访问者
编辑出版 :《高分子材料科学与工程》编辑部
地址 :四川省成都市一环路南一段24号 四川大学高分子研究所
电话 :028-8540 1653  E-mail:gfzclbjb@vip.sina.com
高分子材料科学与工程 ® 2026 版权所有
技术支持:北京勤云科技发展有限公司