橡胶弹性体的形变热效应特征及分析
DOI:
作者:
作者单位:

作者简介:

通讯作者:

中图分类号:

基金项目:

湖南省教育厅科学研究项目(13C798)


Features and Analysis of Deformation Thermal Effects of Rubber-Like Materials
Author:
Affiliation:

Fund Project:

  • 摘要
  • |
  • 图/表
  • |
  • 访问统计
  • |
  • 参考文献
  • |
  • 相似文献
  • |
  • 引证文献
  • |
  • 资源附件
  • |
  • 文章评论
    摘要:

    红外热成像仪同步跟踪橡胶弹性体材料的循环形变过程,几种特殊的热效应特征能被观察到:(1)拉伸时明显的热弹转变效应,即橡胶试样在拉伸时要经历一个明显的温度降低,然后温度才逐渐升高;(2)试样初始拉伸-回复时,温度变量具有部分可逆性,而随后的拉伸-回复温度变化几乎完全可逆;(3)拉伸时温度升高具有速率依赖性,即拉伸速率越快,温升越高。热效应特征能反映形变分子聚集结构的变化,显然,橡胶的受力形变过程除构象变化以外,还具有其它特殊的分子结构变化。

    Abstract:

    When synchronous tracking the cyclic deformation process of rubber-like materials by infrared thermography, several particular thermal effects features were observed: (1) there is a thermo-elastic inversion effect that the temperature has a tiny decrease at first and then increase during the stretching process. (2) Temperature variation is partly reversible in the first loading-unloading cycle and totally reversible in the following cycles. (3) Temperature rise upon drawing dependents on deformation rates, and the higher the extension rate is, the greater the temperature rise is. The thermal effects can reflect the change of molecular aggregation structure, and so it is obvious that besides conformation change, there is also special molecular structure change.

    参考文献
    相似文献
    引证文献
引用本文

王 孟,廖 云.橡胶弹性体的形变热效应特征及分析[J].高分子材料科学与工程,2014,30(8):115-118. Meng Wang, Yun Liao. Features and Analysis of Deformation Thermal Effects of Rubber-Like Materials[J]. Polymer Materials Science & Engineering,2014,30(8):115-118.

复制
文章指标
  • 点击次数:
  • 下载次数:
  • HTML阅读次数:
  • 引用次数:
历史
  • 收稿日期:
  • 录用日期:
  • 网络出版日期:
  • 在线发布日期: 2014-08-20
  • 出版日期:
您是第      位访问者
编辑出版 :《高分子材料科学与工程》编辑部
地址 :四川省成都市一环路南一段24号 四川大学高分子研究所
电话 :028-8540 1653  E-mail:gfzclbjb@vip.sina.com
高分子材料科学与工程 ® 2026 版权所有
技术支持:北京勤云科技发展有限公司