Vinyl ester resin (VER)/graphite conductive composites for the bipolar plate of proton exchange membrane fuel cells (PEMFC) were prepared through hot-pressing. The effects of resin content, molding conditions and carbon black (CB) content on the electrical conductivity and flexural strength of the composites were investigated and characterized by SEM, DSC and TGA. The results show that flexural strength increases with increasing resin content, but electrical conductivity decreases. The properties of VER/graphite composite are influenced obviously by pressing temperature. The appropriate increase of molding pressure can effectively improve the electrical conductivity and flexural strength of composite. The curing degree of resin is affected by molding temperature and holding time. Electrical conductivity and flexural strength increase firstly, and then decrease with increasing CB content. Under the follow conditions of resin content 15%, pressing temperature 100 ℃, compressing pressure 18 MPa, molding temperature 160 ℃ and holding time 10 min, when 10% CB was added, electrical conductivity and flexural strength of VER/graphite composite can rise up to 85.7 S/cm and 48.4 MPa, respectively.
参考文献
相似文献
引证文献
引用本文
王成国,吴 宏,郭少云.乙烯基酯树脂/石墨双极板复合材料的制备[J].高分子材料科学与工程,2014,30(8):125-129. Chengguo Wang, Hong Wu, Shaoyun Guo. Preparation of Vinyl Ester Resin/Graphite Composite for Bipolar Plate[J]. Polymer Materials Science & Engineering,2014,30(8):125-129.