石墨烯和硅丙乳液复合材料的制备及性能
DOI:
作者:
作者单位:

作者简介:

通讯作者:

中图分类号:

基金项目:

国家自然科学基金资助项目(21276152)


Preparation and Properties of Graphene and Silicone-Acrylic Emulsion Composites
Author:
Affiliation:

Fund Project:

  • 摘要
  • |
  • 图/表
  • |
  • 访问统计
  • |
  • 参考文献
  • |
  • 相似文献
  • |
  • 引证文献
  • |
  • 资源附件
  • |
  • 文章评论
    摘要:

    采用化学氧化还原法和超声分散制备出石墨烯(GN),采用X射线衍射仪、红外光谱和原子力显微镜对所得石墨烯进行了分析和表征。结果表明,氧化石墨烯被较好地还原为石墨烯并且成功分散为纳米级厚度;采用溶液超声共混法制备石墨烯/硅丙乳液复合材料。对复合材料成膜进行扫描电镜表征、热重分析、导电渗流测试、力学性能以及耐水、耐腐蚀性测试,发现复合材料具有较低的渗滤阈值(质量分数0.5%),石墨烯用量大于0.9%时,体积电阻率基本稳定在103Ω·cm以下,导电性有了明显提高;石墨烯的用量为0.7% 时,与硅丙乳液相比,复合材料拉伸强度提高了15.5%,断裂伸长率下降了3.6%,耐水性提高了14%,失重5%时的热分解温度提高了43℃,耐腐蚀性能也得到了极大提高。

    Abstract:

    Graphene(GN) and silicone-acrylate emulsion composites were prepared by joining graphene solution which was obtained by chemical reduction-oxidation and ultrasonic dispersion into acrylic emulsion. The graphene was characterized by XRD, AFM and IR and the composite films were characterized by SEM, TG, electrical conductivity, anti-corrosion performance test, mechanics performance and water resistance test. The results show that the graphene obtained from graphene oxide by reduction reaction is better and was successfully dispersed with nanoscale thickness. The composites exhibit excellent electrical properties with a percolation threshold as low as 0.5% and a stable volume resistance below 103 Ω·cm when the graphene content is more than 0.9%. In addition, when the additive amount of GN reached 0.7%, compared with silicone acrylate emulsion, the tensile strength of the composite materials increases by 15.5%, the elongation at break decreases by 3.6% and the decomposition temperature increases nearly 43 ℃, the performance of resistance to water increases by 14% and corrosion resistance is greatly improved.

    参考文献
    相似文献
    引证文献
引用本文

巨浩波,吕生华,孙 婷,孔宪辉.石墨烯和硅丙乳液复合材料的制备及性能[J].高分子材料科学与工程,2014,30(8):144-149. Haobo Ju, Shenghua Lv, Ting Sun, Xianhui Kong. Preparation and Properties of Graphene and Silicone-Acrylic Emulsion Composites[J]. Polymer Materials Science & Engineering,2014,30(8):144-149.

复制
文章指标
  • 点击次数:
  • 下载次数:
  • HTML阅读次数:
  • 引用次数:
历史
  • 收稿日期:
  • 录用日期:
  • 网络出版日期:
  • 在线发布日期: 2014-08-20
  • 出版日期:
您是第      位访问者
编辑出版 :《高分子材料科学与工程》编辑部
地址 :四川省成都市一环路南一段24号 四川大学高分子研究所
电话 :028-8540 1653  E-mail:gfzclbjb@vip.sina.com
高分子材料科学与工程 ® 2026 版权所有
技术支持:北京勤云科技发展有限公司