聚乳酸纳米纤维的电纺制备及影响因素
DOI:
作者:
作者单位:

作者简介:

通讯作者:

中图分类号:

基金项目:

国家自然科学基金青年基金(51203066,31201134)


Influencing Factors of Preparation of Polylactic Acid Nanofiber via Electrospinning
Author:
Affiliation:

Fund Project:

  • 摘要
  • |
  • 图/表
  • |
  • 访问统计
  • |
  • 参考文献
  • |
  • 相似文献
  • |
  • 引证文献
  • |
  • 资源附件
  • |
  • 文章评论
    摘要:

    为实现聚乳酸(PLA)纳米纤维的电纺制备,采用理论分析与实验探究相结合的方式,以聚合物溶解理论分析确定了聚乳酸静电纺丝的较理想溶剂,以聚合物射流理论分析计算出静电纺丝的相关工艺参数;以理论分析所得数据为基础,实验探究了聚乳酸质量分数和纺丝工艺参数对纤维形貌和直径的影响。结果表明,在PLA质量分数10%,纺丝距离17cm,纺丝电压18kV,纺丝流速1.0mL/h条件下,可制备连续光滑均匀且直径为587nm 的PLA纤维,理论最优电场强度与实验最优电场强度的偏差仅为5.02%,较好地证明了理论分析的有效性。

    Abstract:

    In order to realize the preparation of polylactic acid (PLA) nanofibers via electrospinning, the method which combines theoretical analysis with experimental exploration was employed. The ideal solvent for PLA electrospinning was chosen based on the theory of polymer solution, the relevant process parameters of electrospinning were calculated based on the theory of polymer jet. The effect of mass fraction of PLA and electrospinning parameters on the morphology and diameter of nanofibers was investigated by experiments based on the data of theoretical analysis. The results show that a diameter of 587 nm PLA fiber which is continuous, smooth and uniform can be prepared under the conditions of PLA mass fraction at 10%, electrospinning distance at 17cm, voltage at 18 kV and speed at 1.0 mL/h. Furthermore, the deviation of optimal electric field intensity between theory and experiment is only 5.02%, which well proves the validity of the theoretical analysis.

    参考文献
    相似文献
    引证文献
引用本文

王雪芳,刘景艳,王鸿博,傅佳佳,万玉芹.聚乳酸纳米纤维的电纺制备及影响因素[J].高分子材料科学与工程,2014,30(8):161-166. Xuefang Wang, Jingyan Liu, Hongbo Wang, Jiajia Fu, Yuqin Wan. Influencing Factors of Preparation of Polylactic Acid Nanofiber via Electrospinning[J]. Polymer Materials Science & Engineering,2014,30(8):161-166.

复制
文章指标
  • 点击次数:
  • 下载次数:
  • HTML阅读次数:
  • 引用次数:
历史
  • 收稿日期:
  • 录用日期:
  • 网络出版日期:
  • 在线发布日期: 2014-08-20
  • 出版日期:
您是第      位访问者
编辑出版 :《高分子材料科学与工程》编辑部
地址 :四川省成都市一环路南一段24号 四川大学高分子研究所
电话 :028-8540 1653  E-mail:gfzclbjb@vip.sina.com
高分子材料科学与工程 ® 2026 版权所有
技术支持:北京勤云科技发展有限公司