接枝丙烯酸盐聚合物改性聚酯薄膜表面
DOI:
作者:
作者单位:

作者简介:

通讯作者:

中图分类号:

基金项目:

国家专项基金项目(51243003);国家青年科学基金资助项目(51203015);江苏省青蓝工程资助


Grafting Polyacrylate Modified Polyester Film Surface
Author:
Affiliation:

Fund Project:

  • 摘要
  • |
  • 图/表
  • |
  • 访问统计
  • |
  • 参考文献
  • |
  • 相似文献
  • |
  • 引证文献
  • |
  • 资源附件
  • |
  • 文章评论
    摘要:

    利用表面引发原子转移自由基聚合(SI-ATRP)将丙烯酸盐聚合物接枝到聚酯(PET)薄膜表面。研究不同反应温度和反应时间条件下接枝改性对聚酯薄膜表面组成、结构和性能的影响。通过衰减全反射-傅里叶变换红外光谱仪、X射线光电子能谱仪、扫描电子显微镜和热失重仪对接枝改性前后的聚酯薄膜进行相关表征。测试结果表明,反应温度和反应时间对聚酯薄膜的接枝百分率和接触角有一定程度的影响,接枝百分率最大为2.58%,接触角为110°。热失重数据得出,改性薄膜的初始分解温度和引发剂的一致,为395℃,表明接枝的丙烯酸盐聚合物对聚酯薄膜本体热性能影响不大。

    Abstract:

    Polyester(PET) film was grafted with polyacrylate via surface initiated atom transfer radical polymerization (SI-ATRP) so as to change the surface structures and properties of membrane. The influences of different reaction temperature and time of grafting on the surface compositions, structures and properties of PET films were studied. The Fourier transform infrared spectroscopy (FT-IR/ATR), X-ray photoelectron spectroscopy (XPS), scanning electron microscope (SEM) and thermo-gravimetric apparatus (TGA) were used to characterize the PET initiator and grafted PET film. The results indicate that surface composition and properties of PET films are improved greatly by grafted polyacrylate, then the grafting percentage is 2.58% and the contact angle of modified film is 110°. The data of TGA shows that chemical change on the film has no effect on the thermal stability of polyester film.

    参考文献
    相似文献
    引证文献
引用本文

张洪文,张敏艳,姜 彦,俞 强.接枝丙烯酸盐聚合物改性聚酯薄膜表面[J].高分子材料科学与工程,2014,30(8):174-177. Hongwen Zhang, Minyan Zhang, Yan Jiang, Qiang Yu. Grafting Polyacrylate Modified Polyester Film Surface[J]. Polymer Materials Science & Engineering,2014,30(8):174-177.

复制
文章指标
  • 点击次数:
  • 下载次数:
  • HTML阅读次数:
  • 引用次数:
历史
  • 收稿日期:
  • 录用日期:
  • 网络出版日期:
  • 在线发布日期: 2014-08-20
  • 出版日期:
您是第      位访问者
编辑出版 :《高分子材料科学与工程》编辑部
地址 :四川省成都市一环路南一段24号 四川大学高分子研究所
电话 :028-8540 1653  E-mail:gfzclbjb@vip.sina.com
高分子材料科学与工程 ® 2026 版权所有
技术支持:北京勤云科技发展有限公司