环氧功能化非离子型水性聚氨酯与聚丙烯酸酯共混材料的制备与性能
DOI:
作者:
作者单位:

作者简介:

通讯作者:

中图分类号:

基金项目:

国家中小型企业创新基金(11C26215123296)


Properties of Epoxy-Enhanced Nonionic Waterborne Polyurethane/ Polyacrylate Blends
Author:
Affiliation:

Fund Project:

  • 摘要
  • |
  • 图/表
  • |
  • 访问统计
  • |
  • 参考文献
  • |
  • 相似文献
  • |
  • 引证文献
  • |
  • 资源附件
  • |
  • 文章评论
    摘要:

    以环氧树脂(E51)和乙氧基封端聚合物二醇(D3403)为原料,制备了环氧功能化非离子型水性聚氨酯(EPU),并与聚丙烯酸酯(PA)制备了EPU/PA共混乳液,研究了EPU/PA共混材料的性能。结果表明,随着共混材料中聚氨酯组分的增加,乳液粒径减小、粒度分布变窄;红外分析显示环氧基在分子链间产生作用,提高了2种聚合物的相容性,结合原子力显微镜分析显示2种聚合物无明显相分离现象,EPU/PA的tanδ 温度曲线上出现的单玻璃化转变温度(Tg)和Davies方程拟合曲线表明2种聚合物的相容性较好;随聚氨酯组分的增加,涂膜的断裂伸长率由135%增大到337%,断裂强度由11.5 MPa增大到34.4 MPa;共混涂膜的热稳定性明显优于EPU。

    Abstract:

    Epoxy-enhanced nonionic waterborne polyurethane (EPU) was synthesized from epoxy resin (E51) and ethoxylated polymeric diol (D3403), and blended with polyacrylate (PA) to obtain the EPU/PA emulsion. The properties of EPU/PA were investigated. The results show that with increasing the EPU content of EPU/PA, the average particle size decreases and particle size distribution narrows. FT-IR tests indicate that epoxy groups between chains improve the compatibility of polymers. Atomic force microscopy (AFM) analysis shows that there is no significant phase separation. The single glass transition temperature(Tg)of EPU/PA, referring to the fitting curve of Davies equation, indicates that the compatibility of blends is good. The elongation at break and breaking strength of films increase from 135% to 337% and 11.5 MPa to 34.4 MPa,respectively, as increasing the EPU content of EPU/PA. The thermal stability of EPU/PA is better than that of EPU.

    参考文献
    相似文献
    引证文献
引用本文

董伟, 陈政, 韩颜庭, 辛中印.环氧功能化非离子型水性聚氨酯与聚丙烯酸酯共混材料的制备与性能[J].高分子材料科学与工程,2014,30(9):111-116. Wei Dong, Zheng Chen, Yanting Han, Zhongyin Xin. Properties of Epoxy-Enhanced Nonionic Waterborne Polyurethane/ Polyacrylate Blends[J]. Polymer Materials Science & Engineering,2014,30(9):111-116.

复制
文章指标
  • 点击次数:
  • 下载次数:
  • HTML阅读次数:
  • 引用次数:
历史
  • 收稿日期:
  • 录用日期:
  • 网络出版日期:
  • 在线发布日期: 2014-09-22
  • 出版日期:
您是第      位访问者
编辑出版 :《高分子材料科学与工程》编辑部
地址 :四川省成都市一环路南一段24号 四川大学高分子研究所
电话 :028-8540 1653  E-mail:gfzclbjb@163.net; gfzclbjb@vip.sina.com
高分子材料科学与工程 ® 2026 版权所有
技术支持:北京勤云科技发展有限公司