静电喷雾法制备羧甲基纤维素/壳聚糖液芯微胶囊
DOI:
作者:
作者单位:

作者简介:

通讯作者:

中图分类号:

基金项目:


Fabrication of Carboxymethyl Cellulose/Chitosan Microcapsules by Electrospray Technique
Author:
Affiliation:

Fund Project:

  • 摘要
  • |
  • 图/表
  • |
  • 访问统计
  • |
  • 参考文献
  • |
  • 相似文献
  • |
  • 引证文献
  • |
  • 资源附件
  • |
  • 文章评论
    摘要:

    以羧甲基纤维素(CMC)和壳聚糖(CS)聚合物为原料,采用静电喷雾技术制备了CMC/CS液芯微胶囊。研究了制备条件对微胶囊成型和尺寸的影响,并用激光扫描共聚焦显微镜、扫描电子显微镜和倒置显微镜进行了表征。将四环素与CMC溶液共混,以Al3+ CS作为凝固浴,在电压10 kV、液面距离20 mm、流速10 mL/h的条件下,制备了载药微胶囊。微胶囊的药物包封率随壳聚糖浓度增大而提高,在1.5%时达到99.5%。药物释放实验结果表明CMC/CS液芯微胶囊的释放率与pH有关,控释性能良好。

    Abstract:

    Carboxymethyl cellulose/chitosan (CMC/CS) microcapsules were prepared by electrospray. The structure, mean particles size and morphology of produced microcapsules were characterized by inverted microscope, scanning electron microscope (SEM) and confocal laser scanning microscope (CLSM). The effects of preparation conditions (such as flow rate, working voltage, the distance from needle-to-collector, coagulating bath and polyelectrolyte concentrations) on the shape and size of the microcapsules were investigated. The diameters of microcapsules were controlled from 100 μm to 110 μm by adjusting preparation conditions. Tetracycline was encapsulated in the CMC/CS microcapsules with high encapsulation efficiencies (99.5%). Release behaviours for tetracycline demonstrate that the microcapsules have pH triggered controlled release property.

    参考文献
    相似文献
    引证文献
引用本文

王飞俊, 陆方姝, 邵自强.静电喷雾法制备羧甲基纤维素/壳聚糖液芯微胶囊[J].高分子材料科学与工程,2014,30(9):117-121. Feijun Wang, Fangshu Lu, Ziqiang Shao. Fabrication of Carboxymethyl Cellulose/Chitosan Microcapsules by Electrospray Technique[J]. Polymer Materials Science & Engineering,2014,30(9):117-121.

复制
文章指标
  • 点击次数:
  • 下载次数:
  • HTML阅读次数:
  • 引用次数:
历史
  • 收稿日期:
  • 录用日期:
  • 网络出版日期:
  • 在线发布日期: 2014-09-22
  • 出版日期:
您是第      位访问者
编辑出版 :《高分子材料科学与工程》编辑部
地址 :四川省成都市一环路南一段24号 四川大学高分子研究所
电话 :028-8540 1653  E-mail:gfzclbjb@vip.sina.com
高分子材料科学与工程 ® 2026 版权所有
技术支持:北京勤云科技发展有限公司