胶束共聚法制备丙烯酰胺二元共聚物及其性能评价
DOI:
作者:
作者单位:

作者简介:

通讯作者:

中图分类号:

基金项目:


Preparation of Acrylamide Bipolymer by Micelle Copolymerization and Performance Evaluation
Author:
Affiliation:

Fund Project:

  • 摘要
  • |
  • 图/表
  • |
  • 访问统计
  • |
  • 参考文献
  • |
  • 相似文献
  • |
  • 引证文献
  • |
  • 资源附件
  • |
  • 文章评论
    摘要:

    以氧化还原体系为引发剂,采用自由基胶束共聚合法制备了疏水缔合型二元共聚物聚(丙烯酰胺/N-辛基丙烯酰胺)P(AM-C8AM)。考察了引发剂用量、引发温度、单体浓度、疏水单体含量、添加剂用量对疏水缔合水溶性聚合物相对分子质量的影响。结果表明,引发剂质量分数为0.01%,单体总质量分数为25%,尿素的质量分数为2%,甲酸钠的质量分数为0.002%,乙二胺四乙酸二钠的质量分数为0.004%,引发温度为15 ℃时,成功合成了疏水缔合型丙烯酰胺,相对分子质量为1258.43。测定了聚合物水溶液的表观黏度,考察了其耐温抗盐性,在80 ℃时黏度仍能达到71.6mPa·s,黏度保持率为58.35%。并将其与普通均聚物进行了对比。

    Abstract:

    Using the redox system as initiator, hydrophobically associating bipolymer(acrylamide/ octylacrylamide)P(AM-C8AM) was prepared by free radical micellar copolymerization. The effect of initiator dosage, reaction temperature,monomer concentration, hydrophobic monomer content, additive dosage on molecule weight of the hydrophobically associating water-soluble polymer was discussed. The results show that with the dosage of initiator 0.01%, total monomer mass fration 25%, the mass fration of urea 2%, the mass fraction of sodium formate 0.002%, ethylenediamine tetraacetic acid disodium mass fraction 0.004%, the temperature of 15 ℃, the hydrophobic associating acrylamide was successfully synthesized, and the molecular weight is 1258.43. The apparent viscosity, temperature resistance and salt tolerance of the polymer solution were studied. At 80 ℃, viscosity still can reach 71.6 mPa·s, viscosity remains at 58.35%. Moreover, the comparisons with those of traditional homopolymers were performed.

    参考文献
    相似文献
    引证文献
引用本文

闫义彬,丁 伟,曲广淼,梁 爽.胶束共聚法制备丙烯酰胺二元共聚物及其性能评价[J].高分子材料科学与工程,2014,30(10):6-10. Yibin Yan, Wei Ding, Guangmiao Qu, Shuang Liang. Preparation of Acrylamide Bipolymer by Micelle Copolymerization and Performance Evaluation[J]. Polymer Materials Science & Engineering,2014,30(10):6-10.

复制
文章指标
  • 点击次数:
  • 下载次数:
  • HTML阅读次数:
  • 引用次数:
历史
  • 收稿日期:
  • 录用日期:
  • 网络出版日期:
  • 在线发布日期: 2014-10-17
  • 出版日期:
您是第      位访问者
编辑出版 :《高分子材料科学与工程》编辑部
地址 :四川省成都市一环路南一段24号 四川大学高分子研究所
电话 :028-8540 1653  E-mail:gfzclbjb@vip.sina.com
高分子材料科学与工程 ® 2026 版权所有
技术支持:北京勤云科技发展有限公司