PTW 含量对回收饮料瓶R-PET/PC共混材料性能的影响
DOI:
作者:
作者单位:

作者简介:

通讯作者:

中图分类号:

基金项目:


Effect of PTW Contents on Properties of Recycled Drink Bottles R-PET/PC Blends
Author:
Affiliation:

Fund Project:

  • 摘要
  • |
  • 图/表
  • |
  • 访问统计
  • |
  • 参考文献
  • |
  • 相似文献
  • |
  • 引证文献
  • |
  • 资源附件
  • |
  • 文章评论
    摘要:

    乙烯-丙烯酸丁酯-甲基丙烯酸缩水甘油酯(PTW)是一种含有缩水甘油酯型环氧的三元共聚物。以PTW 为增容剂,采用双螺杆挤出机熔融制备出R-PET/PC/PTW 共混材料。通过力学性能测试、黏度测试、红外光谱分析、冲击断面扫描电镜分析等,研究了PTW 含量的变化对共混材料结构和性能的影响。研究表明,随着PTW 含量的不断增多,RPET/PC/PTW 共混材料冲击断面中两相相界面越来越模糊,相容性明显改善;共混材料特性黏度不断提高,熔体流动速率(MFR)逐渐变小;当PTW 含量在10%时,黏度达到0.6328dL/g,共混材料的综合力学性能最佳,缺口冲击强度达到11.74kJ/m2,比不加PTW 的R-PET/PC共混物的冲击强度2.41kJ/m2 提高近4倍。共混材料弯曲强度有所提高,拉伸强度有少许的下降,但断裂伸长率大幅提高,说明PTW 对R-PET/PC共混材料是一种很好的增韧增容剂。

    Abstract:

    Ethylene/butyl acrylate/methyl acrylic glycidyl ester (PTW) was a kind of terpolymer containing glycidyl ester type epoxy.PTW was chosen as compatilizer and the recycled polyethylene terephthalate(R-PET)/ polycarbonate(PC) blending alloy was prepared by twin-screw extruder under the molten state.The effect of PTW contents on the structure and properties of the blending materials were discussed by means of mechanics performance testing, torque rheological analysis, Fourier transform infrared spectrometry(FT-IR) and scanning electron microscopy(SEM).The results show that with increasing of the PTW content , the impact-fractured surfaces of phase interface become fuzzier, the compatibilization of the blends changes better; the viscosity constantly improves while the MFR gradually decreases; the intrinsic viscosity reaches 0.6328 dL/g by addition of 10% PTW, and the comprehensive mechanical properties and the compatibility achieve the best. The notch impact strength rises up to 11.74 kJ/m2 which raises more than 4 times compared to that of the blend without PTW.The bending strength of the materials increases while the tensile strength has a little decrease, but elongation at breaking has a large improvement.PTW is a very useful toughening compatilizer which can not only effectively improves the compatibility of R-PET and PC blends but also plays a good toughening role in the blends.

    参考文献
    相似文献
    引证文献
引用本文

李迎春,马星慧,乔 冰,贺茂勇,宋晶晶. PTW 含量对回收饮料瓶R-PET/PC共混材料性能的影响[J].高分子材料科学与工程,2014,30(10):66-71. Yingchun Li, Xinghui Ma, Bing Qiao, Maoyong He, Jingjing Song. Effect of PTW Contents on Properties of Recycled Drink Bottles R-PET/PC Blends[J]. Polymer Materials Science & Engineering,2014,30(10):66-71.

复制
文章指标
  • 点击次数:
  • 下载次数:
  • HTML阅读次数:
  • 引用次数:
历史
  • 收稿日期:
  • 录用日期:
  • 网络出版日期:
  • 在线发布日期: 2014-10-17
  • 出版日期:
您是第      位访问者
编辑出版 :《高分子材料科学与工程》编辑部
地址 :四川省成都市一环路南一段24号 四川大学高分子研究所
电话 :028-8540 1653  E-mail:gfzclbjb@vip.sina.com
高分子材料科学与工程 ® 2026 版权所有
技术支持:北京勤云科技发展有限公司