Abstract:A series of polyurethane-polyacrylate (PUA) dispersions were obtained through in-situ emulsion polymerization, using acetoacetoxy ethyl methacrylate (AAEM) as ketone monomer, adipic dihydrazide (ADH), carbohydrazide, oxalylhydrazide and succinohydrazide as hydrazine monomer. The particle size and micromorphology of PUA colloidal particles were characterized by transmission electron microscopy and dynamic light scattering. The effects of hydrazine monomers on the mechanical property, cross-section morphology, water resistance and thermal properties of PUA films were investigated. Meanwhile, decomposition kinetic was characterized with activation parameters through Kissinger method. It is found that the water resistance, crosslinking density, mechanical property and thermal stability can be improved with the introduction of hydrazine monomers. The film fracture transfers from brittle fracture to ductile fracture. The particle size and distribution decrease with increasing the hydrophility of hydrazine monomers. Among four hydrazine monomers, carbohydrazide displays the highest reactivity, while the reactivity of ADH is the lowest. The PUA film prepared with carbohydrazide is endowed with better mechanical property, water resistance and thermal property, as well as higher thermal decomposition activation energy. While the PUA film made from ADH displays poor performance.