纤维素在离子液体中的均相热塑化改性
DOI:
作者:
作者单位:

作者简介:

通讯作者:

中图分类号:

基金项目:

国家自然科学基金资助项目(21075043)


Homogenous Thermoplastic Modification of Cellulose in Ionic Liquid
Author:
Affiliation:

Fund Project:

  • 摘要
  • |
  • 图/表
  • |
  • 访问统计
  • |
  • 参考文献
  • |
  • 相似文献
  • |
  • 引证文献
  • |
  • 资源附件
  • |
  • 文章评论
    摘要:

    以微晶纤维素(MCC)为前驱体,苯甲酰氯为酯化剂,在离子液体BmimCl中均相改性微晶纤维素,合成得到纤维素苯甲酸酯(CB),通过控制苯甲酰氯的用量得到了不同取代度的CB。利用傅里叶变换红外光谱、核磁共振碳谱、X射线衍射对不同取代度的CB进行结构表征,采用差示扫描量热仪、热压形态考察CB的热学性能和热塑性。结果显示,随苯甲酰氯用量增加,CB的取代度增加,但取代度增大的趋势逐渐减弱,当苯甲酰氯与葡萄糖单元的摩尔比在2~3之间时,取代度增幅最大。改性后的微晶纤维素呈现良好的热塑性,可自粘合成型,在DS>0.83时具有明显的玻璃化转变温度,且该温度由取代度0.83时的182.24℃逐渐降低到取代度2.56时的173.36℃。

    Abstract:

    Cellulose benzoate (CB) was synthesized from microcrystalline cellulose(MCC) and benzoyl chloride by homogenous modification of MCC in 1-butyl-3-methylimidazomlium chloride(BmimCl) ionic liquid . Different substitution degree CBs were obtained by controlling the amount of benzoyl chloride. CBs were characterized by FT-IR, 13C-NMR and XRD. DSC and hot pressure were used to study hot thermal properties and thermoplastic of CBs. Experimental results show that with increase of the benzoyl chloride content, the DS of CB increases. The increase trend of DS tends to weaken gradually. When the mole ratio of benzoyl chloride and AGU is 2~3, the increase in DS is the largest. Without any adhesives, modified microcrystalline cellulose has good thermoplastic character and can mold self-adhesively. DS > 0.83, the modified microcrystalline cellulose have a distinct glass transition temperature, and the temperature gradually decreases from 18224 ℃(DS=0.83)to 173.36 ℃ (DS=2.56).

    参考文献
    相似文献
    引证文献
引用本文

刘丽华,薛 锋,丁恩勇.纤维素在离子液体中的均相热塑化改性[J].高分子材料科学与工程,2014,30(10):95-99. Lihua Liu, Feng Xue, Enyong Ding. Homogenous Thermoplastic Modification of Cellulose in Ionic Liquid[J]. Polymer Materials Science & Engineering,2014,30(10):95-99.

复制
文章指标
  • 点击次数:
  • 下载次数:
  • HTML阅读次数:
  • 引用次数:
历史
  • 收稿日期:
  • 录用日期:
  • 网络出版日期:
  • 在线发布日期: 2014-10-17
  • 出版日期:
您是第      位访问者
编辑出版 :《高分子材料科学与工程》编辑部
地址 :四川省成都市一环路南一段24号 四川大学高分子研究所
电话 :028-8540 1653  E-mail:gfzclbjb@vip.sina.com
高分子材料科学与工程 ® 2026 版权所有
技术支持:北京勤云科技发展有限公司