超拉伸熔纺UHMWPE纤维结晶结构的变化
DOI:
作者:
作者单位:

作者简介:

通讯作者:

中图分类号:

基金项目:


Crystal Structural Transitions in Drawing Process of UHMWPE Fibers Prepared by the Melt Spun Method
Author:
Affiliation:

Fund Project:

  • 摘要
  • |
  • 图/表
  • |
  • 访问统计
  • |
  • 参考文献
  • |
  • 相似文献
  • |
  • 引证文献
  • |
  • 资源附件
  • |
  • 文章评论
    摘要:

    利用广角X射线衍射仪、热分析仪、小角X射线散射仪研究了熔纺UHMWPE纤维在超拉伸过程中结晶结构的演变过程。研究显示,随着拉伸的进行,UHMWPE纤维的结晶度逐渐增加,其值最终稳定在66%左右;横向晶粒尺寸逐渐下降,(110)和(200)晶面的值稳定在13.4nm 和9.7nm 左右;折叠链逐渐向伸直链转变;第一熔融峰温度逐渐提高,且在高倍拉伸下,出现第二熔融峰;纤维的取向度逐渐增加,缺陷度逐渐下降;流动性改性剂的加入仅仅改善了UHMWPE的流动性,并不影响纤维在拉伸过程中结晶结构的变化趋势。

    Abstract:

    The crystal structure transitions in drawing process of the UHMWPE fibers were preliminarily studied by XRD,DSC,SAXS. With increase of draw ratio values, the DSC crystallinity of the UHMWPE fibers gradually increases to 66%; the grain size of (110) plane and (200) plane finally decrease to 13.4 nm and 9.7 nm respectively; the folded chain crystals gradually transform into extended chain crystals; the first melting endotherm peak temperature increases and the second melting endotherm peak occurs as the draw ratio values is higher than 36; the degree of defects in the UHMWPE fibers decreases; the addition of fluidity modifier in UHMWPE improves the fluidity of UHMWPE yet without affecting the crystal structures of UHMWPE fibers in the drawing process.

    参考文献
    相似文献
    引证文献
引用本文

张 强,王庆昭,陈 勇.超拉伸熔纺UHMWPE纤维结晶结构的变化[J].高分子材料科学与工程,2014,30(10):100-103. Qiang Zhang, Qingzhao Wang, Yong Chen. Crystal Structural Transitions in Drawing Process of UHMWPE Fibers Prepared by the Melt Spun Method[J]. Polymer Materials Science & Engineering,2014,30(10):100-103.

复制
文章指标
  • 点击次数:
  • 下载次数:
  • HTML阅读次数:
  • 引用次数:
历史
  • 收稿日期:
  • 录用日期:
  • 网络出版日期:
  • 在线发布日期: 2014-10-17
  • 出版日期:
您是第      位访问者
编辑出版 :《高分子材料科学与工程》编辑部
地址 :四川省成都市一环路南一段24号 四川大学高分子研究所
电话 :028-8540 1653  E-mail:gfzclbjb@vip.sina.com
高分子材料科学与工程 ® 2026 版权所有
技术支持:北京勤云科技发展有限公司