玻璃态高分子材料的低温塑性加工实验探讨
DOI:
作者:
作者单位:

作者简介:

通讯作者:

中图分类号:

基金项目:

国家留学回国人员科研启动基金(教外司留2003406)


A Discussion on Plastic Working for Glassy Polymer Materials at Low Temperature
Author:
Affiliation:

Fund Project:

  • 摘要
  • |
  • 图/表
  • |
  • 访问统计
  • |
  • 参考文献
  • |
  • 相似文献
  • |
  • 引证文献
  • |
  • 资源附件
  • |
  • 文章评论
    摘要:

    通过对聚氯乙烯(PVC)和聚碳酸酯(PC)试样进行单轴拉伸,使其高分子结构实现了非平衡化,并观察了力学特性随时间的变化。研究了形变量及热历史对材料力学特性的影响,并对试样进行了差示扫描量热分析。结果表明,在形变后的短时间内,高分子凝聚态结构热力学非平衡程度高,高分子材料呈“软化”状态。而经过一段较长时间,与形变前相比,材料形变后的屈服应力、弹性模量等力学特性明显提高。这为利用材料形变后短时间其结构呈软化特性来实现固体高分子材料的低温成型,以及形变后长时间所发生的“硬化”现象来实现材料的高强度化,提供了实验性依据。

    Abstract:

    Non-equilibrium polymer structure of samples of polyvinyl chloride (PVC) and polycarbonate (PC)was obtained by stretching them uniaxially to observe their mechanical properties changes with time. In order to discuss the effect of deformation amount and heat history on mechanical properties of materials, DSC analyses were carried out to the samples. The results show that the extent of thermodynamic non-equilibrium of polymer materials becomes higher, in a short time after deformation, and the polymer materials soften. Comparing with the state before deformation, the mechanical properties such as yield stress and elastic modulus after deformation are improved obviously. Thus, the results of this paper provide the experimental foundation for shaping of solid polymer materials at low temperature by utilizing the property that polymer structure softens in a short time after deformation, and strengthening polymer materials by utilizing the phenomenon that the polymer materials become harder in a long time after deformation.

    参考文献
    相似文献
    引证文献
引用本文

崔善子,王俊潮,李 新,王 艳.玻璃态高分子材料的低温塑性加工实验探讨[J].高分子材料科学与工程,2014,30(10):104-107. Shanzi Cui, Junchao Wang, Xin Li, Yan Wang. A Discussion on Plastic Working for Glassy Polymer Materials at Low Temperature[J]. Polymer Materials Science & Engineering,2014,30(10):104-107.

复制
文章指标
  • 点击次数:
  • 下载次数:
  • HTML阅读次数:
  • 引用次数:
历史
  • 收稿日期:
  • 录用日期:
  • 网络出版日期:
  • 在线发布日期: 2014-10-17
  • 出版日期:
您是第      位访问者
编辑出版 :《高分子材料科学与工程》编辑部
地址 :四川省成都市一环路南一段24号 四川大学高分子研究所
电话 :028-8540 1653  E-mail:gfzclbjb@vip.sina.com
高分子材料科学与工程 ® 2026 版权所有
技术支持:北京勤云科技发展有限公司