L型异型材气辅共挤胀大及变形的数值模拟和实验验证
DOI:
作者:
作者单位:

作者简介:

通讯作者:

中图分类号:

基金项目:

国家自然科学基金资助项目(51163011);赣鄱英才555工程领军人才培养计划


Numerical Simulation and Experimental Validation of Die Swell and Deformation in L-Shaped Profile Gas-Assisted Coextrusion
Author:
Affiliation:

Fund Project:

  • 摘要
  • |
  • 图/表
  • |
  • 访问统计
  • |
  • 参考文献
  • |
  • 相似文献
  • |
  • 引证文献
  • |
  • 资源附件
  • |
  • 文章评论
    摘要:

    以L型双层共挤异型材为研究对象,采用Phan-ThienandTanner(PTT)本构方程对该模型进行了三维等温数值模拟,并使用聚丙烯(PP)对该模型进行了实验研究,对比分析了数值模拟结果与实验结果。研究表明,气体以及重力的影响将使气辅共挤异型材制品截面积偏小;数值模拟和实验结果均表明气辅技术能有效减小异型材共挤过程中的挤出胀大和变形,提高共挤异型材制品的质量以及简化异型材共挤口模的设计。

    Abstract:

    Taking the L-shaped coextrusion profile with two layers as an example, three-dimensional isothermal numerical study for this model was performed by Phan-Thien and Tanner(PTT) constitutive equation and experiment was done with PP, numerical simulation and experiment were compared and analyzed. The results revel that the cross section of gas-assisted coextrusion profile is smaller than that of the die due to the effect of gas and gravity; both of numerical simulation and experiment indicate that the gas-assisted coextrusion can reduce the die swell and deformation effectively, improve the quality of the product and simplify the profile coextrusion die.

    参考文献
    相似文献
    引证文献
引用本文

柳和生,何建涛,黄兴元,邓小珍,万齐访. L型异型材气辅共挤胀大及变形的数值模拟和实验验证[J].高分子材料科学与工程,2014,30(10):113-116. Hesheng Liu, Jiantao He, Xingyuan Huang, Xiaozhen Deng, Qifang Wan. Numerical Simulation and Experimental Validation of Die Swell and Deformation in L-Shaped Profile Gas-Assisted Coextrusion[J]. Polymer Materials Science & Engineering,2014,30(10):113-116.

复制
文章指标
  • 点击次数:
  • 下载次数:
  • HTML阅读次数:
  • 引用次数:
历史
  • 收稿日期:
  • 录用日期:
  • 网络出版日期:
  • 在线发布日期: 2014-10-17
  • 出版日期:
您是第      位访问者
编辑出版 :《高分子材料科学与工程》编辑部
地址 :四川省成都市一环路南一段24号 四川大学高分子研究所
电话 :028-8540 1653  E-mail:gfzclbjb@vip.sina.com
高分子材料科学与工程 ® 2026 版权所有
技术支持:北京勤云科技发展有限公司