聚焦超声刺激交联聚乙烯醇-介孔二氧化硅复合材料形状记忆和药物释放
DOI:
作者:
作者单位:

作者简介:

通讯作者:

中图分类号:

基金项目:

国家自然科学基金资助项目(51203102);教育部重大项目资助(313036)


High Intensity Focused Ultrasound Triggered Shape Memory and Drug Release of Crosslinking Poly(Vinyl Alcohol)-Mesoporous Silica Composite
Author:
Affiliation:

Fund Project:

  • 摘要
  • |
  • 图/表
  • |
  • 访问统计
  • |
  • 参考文献
  • |
  • 相似文献
  • |
  • 引证文献
  • |
  • 资源附件
  • |
  • 文章评论
    摘要:

    以介孔二氧化硅MCM-41作为药物载体吸附布洛芬,通过与聚乙烯醇水溶液混合、交联制备了交联聚乙烯醇形状记忆复合材料。采用高强度聚焦超声作为刺激手段,研究了交联聚乙烯醇复合材料的形状记忆性能和药物释放性能。结果表明,在高强度聚焦超声作用下,交联聚乙烯醇形状记忆复合材料具有良好的形状记忆性能,形状回复率随着超声时间的延长逐渐增大直至达到平衡状态,形状回复率可达~90%,且最终回复率随着SiO2/ibuprofen载入量的增大明显下降;同时,聚焦超声实现了布洛芬的可控周期性释放过程,调节聚焦超声时间和功率可以调节布洛芬的释放量;另外,SiO2/ibuprofen的加入提高了聚乙烯醇复合材料的热稳定性。

    Abstract:

    Crosslinked poly(vinyl alcohol)(PVA) shape memory composite containing ibuprofen-loaded mesoporous silica was synthesized by solution blending. The high intensity focused ultrasound (HIFU) as a stimulus, was used to trigger the shape memory and drug release. The results show that the composite shows excellent HIFU controlled shape recovery performance and drug release function. The amount, site and time of released drug can be adjusted by changing the HIFU power, focal point and time. It is interesting to note that with increasing the SiO2/ibuprofen content, the HIFU triggered shape recovery ratio and rate decrease, which is totally different from the thermal stimulus. This study provides a basis for developing novel ultrasound stimulus responsive shape memory polymer and multi-functional drug carrier.

    参考文献
    相似文献
    引证文献
引用本文

韩建军,费国霞,夏和生.聚焦超声刺激交联聚乙烯醇-介孔二氧化硅复合材料形状记忆和药物释放[J].高分子材料科学与工程,2014,30(10):128-132. Jianjun Han, Guoxia Fei, Hesheng Xia. High Intensity Focused Ultrasound Triggered Shape Memory and Drug Release of Crosslinking Poly(Vinyl Alcohol)-Mesoporous Silica Composite[J]. Polymer Materials Science & Engineering,2014,30(10):128-132.

复制
文章指标
  • 点击次数:
  • 下载次数:
  • HTML阅读次数:
  • 引用次数:
历史
  • 收稿日期:
  • 录用日期:
  • 网络出版日期:
  • 在线发布日期: 2014-10-17
  • 出版日期:
您是第      位访问者
编辑出版 :《高分子材料科学与工程》编辑部
地址 :四川省成都市一环路南一段24号 四川大学高分子研究所
电话 :028-8540 1653  E-mail:gfzclbjb@vip.sina.com
高分子材料科学与工程 ® 2026 版权所有
技术支持:北京勤云科技发展有限公司