介孔SBA-15对不饱和聚酯树脂及其复合材料性能的影响
DOI:
作者:
作者单位:

作者简介:

通讯作者:

中图分类号:

基金项目:

国家自然科学基金资助项目(51263005,51163003,21264005)


Effect of Mesoporous SBA-15 on the Properties of Unsaturated Polyester Resins and Composites
Author:
Affiliation:

Fund Project:

  • 摘要
  • |
  • 图/表
  • |
  • 访问统计
  • |
  • 参考文献
  • |
  • 相似文献
  • |
  • 引证文献
  • |
  • 资源附件
  • |
  • 文章评论
    摘要:

    采用自制介孔SBA-15,利用原位聚合法制备SBA-15/不饱和聚酯(UP)原位树脂。通过模压制得SBA-15/UP复合材料。利用冲击、氮气吸附-脱附、蠕变和应力松弛测试、摩擦测试、扫面电镜等测试手段对SBA-15/UP原位树脂及其复合材料的性能进行表征,研究不同SBA-15含量对SBA-15/UP复合材料性能的影响。结果表明,聚合后,SBA-15的孔径减小。SBA-15的加入能有效改善SBA-15/UP复合材料的摩擦性能和尺寸稳定性,蠕变和应力松弛性能明显得到改善。当SBA-15加入量为2%时,体积磨损率降低了19.58%,冲击强度提高了29.83%。

    Abstract:

    Self-made mesoporous SBA-15 was used to prepare SBA-15/unsaturated polyester by in-situ polymerization. The SBA-15/ unsaturated polyester (UP) composites with different SBA-15 contents were prepared by blending technology and molding method. The properties of mesoporous SBA-15/unsaturated polyester resins and composite materials were studied by impact test, nitrogen adsorption-desorption, creep and stress relaxation tests, friction test and scanning electron microscopy (SEM). The results show that after polymerization, the size of SBA-15 pore decreases. The friction properties and dimensional stability of the SBA-15/UP composites are significantly improved. When the mass fraction of SBA-15 is 2%, the wear rate is decreased 19.58% and the impact strength is increased by 29.83%.

    参考文献
    相似文献
    引证文献
引用本文

胡舒龙,吕 建,卢凤英,章 震,刘华山,曾德明.介孔SBA-15对不饱和聚酯树脂及其复合材料性能的影响[J].高分子材料科学与工程,2014,30(10):159-163. Shulong Hu, Jian Lü, Fengying Lu, Zhen Zhang, Huashan Liu, Deming Zeng. Effect of Mesoporous SBA-15 on the Properties of Unsaturated Polyester Resins and Composites[J]. Polymer Materials Science & Engineering,2014,30(10):159-163.

复制
文章指标
  • 点击次数:
  • 下载次数:
  • HTML阅读次数:
  • 引用次数:
历史
  • 收稿日期:
  • 录用日期:
  • 网络出版日期:
  • 在线发布日期: 2014-10-17
  • 出版日期:
您是第      位访问者
编辑出版 :《高分子材料科学与工程》编辑部
地址 :四川省成都市一环路南一段24号 四川大学高分子研究所
电话 :028-8540 1653  E-mail:gfzclbjb@vip.sina.com
高分子材料科学与工程 ® 2026 版权所有
技术支持:北京勤云科技发展有限公司