3-羟基丁酸-4-羟基丁酸共聚物/醋酸纤维素复合纳米纤维的制备与表征
DOI:
作者:
作者单位:

作者简介:

通讯作者:

中图分类号:

基金项目:


Preparation and Characterization of P(3HB-co-4HB)/Cellulose Acetate Composite Nanofibers
Author:
Affiliation:

Fund Project:

  • 摘要
  • |
  • 图/表
  • |
  • 访问统计
  • |
  • 参考文献
  • |
  • 相似文献
  • |
  • 引证文献
  • |
  • 资源附件
  • |
  • 文章评论
    摘要:

    采用静电纺丝法制备了3-羟基丁酸-4-羟基丁酸共聚物(P(3HB-co-4HB))/醋酸纤维素(CA)复合纳米纤维,并优化了复合纳米纤维的制备工艺,最终可制得直径为356nm,标准方差为0.28的复合纳米纤维。利用扫描电子显微镜、红外光谱、X射线衍射和差示扫描量热分析对复合纳米纤维进行了表征。结果表明,复合纳米纤维表面非常光滑,纤维间呈无序排列,有较高的孔隙;复合纳米纤维的结晶结构与P(3HB-co-4HB)的结晶结构基本相同,少量CA(10%)的加入能促进复合纳米纤维的快速结晶,起到成核剂的作用,从而使纳米纤维的结晶度得到提高,CA 加入量过多时,结晶度下降;随着CA含量的增加,复合纳米纤维的玻璃化转变温度从46.6℃下降至21.3℃,而熔融温度变化不大,在130 ℃附近。

    Abstract:

    Poly(3-hydroxybutyrate-co-4-hydroxybutyrate)(P(3HB-co-4HB))/cellulose acetate(CA) composite nanofibers were successfully prepared by electrospinning method. Under the optimal parameters, the P(3HB-co-4HB)/CA composite nanofiber with average diameter of 356 nm and standard deviation of 0.28 can be prepared. The composite nanofiber was characterized by SEM, FT-IR, XRD and DSC. The results show that the surface of the composite nanofiber is smooth. The composite nanofiber is arranged randomly and high porosity is formed. The crystal structure of the composite nanofiber is the same to that of P(3HB-co-4HB). The crystallinity of the composite nanofiber can be improved by blending small amount of CA(about 10%), which acts as nucleating agent. However, the crystallinity of the composite nanofiber decreases when the CA content is too high in the composite nanofiber. With the CA content increasing in the composite nanofiber, the glass transition temperature decreases from 466 ℃ to 21.3 ℃ while the melting temperature is around 130 ℃ with little changes.

    参考文献
    相似文献
    引证文献
引用本文

蔡志江,许菲菲,郭 杰.3-羟基丁酸-4-羟基丁酸共聚物/醋酸纤维素复合纳米纤维的制备与表征[J].高分子材料科学与工程,2014,30(10):164-168. Zhijiang Cai, Feifei Xu, Jie Guo. Preparation and Characterization of P(3HB-co-4HB)/Cellulose Acetate Composite Nanofibers[J]. Polymer Materials Science & Engineering,2014,30(10):164-168.

复制
文章指标
  • 点击次数:
  • 下载次数:
  • HTML阅读次数:
  • 引用次数:
历史
  • 收稿日期:
  • 录用日期:
  • 网络出版日期:
  • 在线发布日期: 2014-10-17
  • 出版日期:
您是第      位访问者
编辑出版 :《高分子材料科学与工程》编辑部
地址 :四川省成都市一环路南一段24号 四川大学高分子研究所
电话 :028-8540 1653  E-mail:gfzclbjb@vip.sina.com
高分子材料科学与工程 ® 2026 版权所有
技术支持:北京勤云科技发展有限公司