木薯淀粉接枝苯乙烯/丙烯酸丁酯-聚己内酯壳核纤维的制备及表征
DOI:
作者:
作者单位:

作者简介:

通讯作者:

中图分类号:

基金项目:

四川高等学校成果转化重大培育项目(12ZZ005);生物质材料教育部工程研究中心基金项目(13zxbk01)


Preparation and Characterization of Coaxial Electrospun Cassava Starch Grafted with Styrene/Butyl Acrylate (Shell)-Polycaprolactone (Core) Composite Nanaofibers
Author:
Affiliation:

Fund Project:

  • 摘要
  • |
  • 图/表
  • |
  • 访问统计
  • |
  • 参考文献
  • |
  • 相似文献
  • |
  • 引证文献
  • |
  • 资源附件
  • |
  • 文章评论
    摘要:

    利用自由基聚合反应制备了木薯淀粉(CS)接枝苯乙烯(St)/丙烯酸丁酯(Ba)共聚物(CS-g-St/Ba),并且通过同轴静电纺丝法制备了以聚己内酯(PCL)为核层,CS-g-St/Ba为壳层的核壳结构纤维膜。分析了核层PCL浓度和流速对纤维形貌的影响,随着核层PCL浓度的增加,珠状纤维逐渐减少,最后形成无珠粒纤维,且纤维的平均直径逐渐增大,随着核层PCL流速的增加,纤维的平均直径先减小后增大;通过对核壳纤维的透射电镜和纤维断面扫描电镜观察可以清晰地看到壳层CS-g-St/Ba和核层PCL;红外光谱分析表明,St和Ba能同时接枝在CS骨架上,核壳纤维膜中同时含有CSg-St/Ba和PCL;核壳结构纤维膜的拉伸强度为1.58 MPa,弹性模量为12.63 MPa。相对于单轴静电纺CS-g-St/Ba和PCL纤维膜,核壳结构纤维膜的力学性能明显提高。

    Abstract:

    Cassava starch (CS) was grafted with styrene (St)/butyl acrylate (Ba) (CS-g-St/Ba) via free-radical polymerization. CS-g-St/Ba(shell)-polycaprolactone (PCL)(core) composite nanaofibers was prepared by coaxial electrospinning. Fibers morphology at different concentration and flow rates of PCL was observed, respectively. The results indicate that the beaded fibers decreases and the average diameter of the shell-core fibers increases with the concentration of PCL increasing. With the increase of flow rates of PCL, fiber diameter first decreases and then increases. The obvious shell-core structure of fibers was observed by SEM and TEM. FT-IR analysis indicates that St and Ba were successfully grafted onto CS and the shell-core fiber membrane contains both CS-g-St/Ba and PCL. The tensile strength of the coaxial electrospun CS-g-St/Ba(shell)-(PCL)(core) fiber membrane is 1.58 MPa, and flexible mould is 12.63 MPa. Compared with those of single electrospun CS-g-St/Ba or PCL membrane, the mechanical properties of CS-g-St/Ba(shell)- (PCL) (core) fiber membrane are obviously improved.

    参考文献
    相似文献
    引证文献
引用本文

张忠庆,林晓艳,罗学刚.木薯淀粉接枝苯乙烯/丙烯酸丁酯-聚己内酯壳核纤维的制备及表征[J].高分子材料科学与工程,2014,30(10):174-178. Zhongqing Zhang, Xiaoyan Lin, Xuegang Luo. Preparation and Characterization of Coaxial Electrospun Cassava Starch Grafted with Styrene/Butyl Acrylate (Shell)-Polycaprolactone (Core) Composite Nanaofibers[J]. Polymer Materials Science & Engineering,2014,30(10):174-178.

复制
文章指标
  • 点击次数:
  • 下载次数:
  • HTML阅读次数:
  • 引用次数:
历史
  • 收稿日期:
  • 录用日期:
  • 网络出版日期:
  • 在线发布日期: 2014-10-17
  • 出版日期:
您是第      位访问者
编辑出版 :《高分子材料科学与工程》编辑部
地址 :四川省成都市一环路南一段24号 四川大学高分子研究所
电话 :028-8540 1653  E-mail:gfzclbjb@vip.sina.com
高分子材料科学与工程 ® 2026 版权所有
技术支持:北京勤云科技发展有限公司