锂离子电池用聚萘负极材料的制备及电化学性能
DOI:
作者:
作者单位:

作者简介:

通讯作者:

中图分类号:

基金项目:


Preparation and Electrochemical Performance of Polyperinaphthalene Anode Material for Lithium Ion Battery
Author:
Affiliation:

Fund Project:

  • 摘要
  • |
  • 图/表
  • |
  • 访问统计
  • |
  • 参考文献
  • |
  • 相似文献
  • |
  • 引证文献
  • |
  • 资源附件
  • |
  • 文章评论
    摘要:

    采用3,4,9,10-二萘嵌苯四酸二酐(PTCTA)为原料,经高温自由基聚合、气相沉积、脱氢、石墨化工艺制得锂离子电池用聚萘(PPN)负极材料。通过X射线衍射、扫描电子显微镜、激光显微拉曼光谱等检测技术对PPN 负极材料的结构和表面形貌进行了分析与表征,研究了PPN作为锂离子电池负极材料的电化学行为。结果表明,PPN 负极材料具有类似石墨的多片层结构,电化学测试表明,PPN 负极材料具有良好的循环稳定性和倍率性能;在50mA/g电流密度下,PPN负极材料首次放电比容量为368.4mAh/g,经过200圈循环之后,PPN 负极材料的放电比容量仍保持在300.3mAh/g。结果显示PPN适用于做锂离子电池负极材料。

    Abstract:

    Polyperinaphthalene (PPN) anode material for lithium ion battery was prepared by high temperature radical polymerization, vapor deposition, dehydrogenation and graphitization technology using 3,4,9,10-perylenetetracarboxylic dianhydride (PTCTA) as material. The physical structure performance was characterized by X-ray diffraction (XRD), scanning electron microscopy (SEM) and Raman techniques. The electrochemical performances of PPN as anode material of lithium ion battery were investigated. The results show that PPN has a kind of multi-lamellar structure similar to that of graphite. Constant current charge-discharge tests show that PPN anode materials have excellent cycling stability and rate capabilities, the PPN anode material delivers a initial discharge specific capacity of 368.4 mAh/g at the current density of 50 mA/g. After 200 cycles at the same current density, the discharge specific capacity remains at 300.3 mAh/g. The results indicate that PPN is suitable for anode material of lithium ion battery.

    参考文献
    相似文献
    引证文献
引用本文

曾小君,徐 阳,吉 鹏,陈会琴,王航航.锂离子电池用聚萘负极材料的制备及电化学性能[J].高分子材料科学与工程,2014,30(10):179-183. Xiaojun Zeng, Yang Xu, Peng Ji, Huiqin Chen, Hanghang Wang. Preparation and Electrochemical Performance of Polyperinaphthalene Anode Material for Lithium Ion Battery[J]. Polymer Materials Science & Engineering,2014,30(10):179-183.

复制
文章指标
  • 点击次数:
  • 下载次数:
  • HTML阅读次数:
  • 引用次数:
历史
  • 收稿日期:
  • 录用日期:
  • 网络出版日期:
  • 在线发布日期: 2014-10-17
  • 出版日期:
您是第      位访问者
编辑出版 :《高分子材料科学与工程》编辑部
地址 :四川省成都市一环路南一段24号 四川大学高分子研究所
电话 :028-8540 1653  E-mail:gfzclbjb@vip.sina.com
高分子材料科学与工程 ® 2026 版权所有
技术支持:北京勤云科技发展有限公司