聚碳酸亚丙酯聚氨酯弹性体的合成与性能
DOI:
作者:
作者单位:

作者简介:

通讯作者:

中图分类号:

基金项目:


Synthesis and Properties of Poly( Propylene Carbonate) Polyurethane Elastomer
Author:
Affiliation:

Fund Project:

  • 摘要
  • |
  • 图/表
  • |
  • 访问统计
  • |
  • 参考文献
  • |
  • 相似文献
  • |
  • 引证文献
  • |
  • 资源附件
  • |
  • 文章评论
    摘要:

    以聚碳酸亚丙酯二醇、二苯基甲烷二异氰酸酯(MDI)和1,4-丁二醇(BDO)等为原料,采用预聚体法合成了聚碳酸亚丙酯聚氨酯弹性体(PUE-PPC)。研究表明,PUE-PPC拉伸强度和撕裂强度优于聚醚型弹性体;与聚酯型弹性体相比,具有较好的水解稳定性,经35d浸泡后,其拉伸强度保持率高出33%。研究了异氰酸酯指数(R)、预聚体-NCO基含量、扩链剂种类等对PUE-PPC力学性能的影响。结果表明,随着R 值减小,弹性体的拉伸强度和撕裂强度先增大后减小,并在R=1.05时达到最大值,断裂伸长率则一直增大;随着-NCO基含量的增加,弹性体的拉伸强度和撕裂强度提高,而断裂伸长率减小;扩链剂链长越短,弹性体力学性能越好。

    Abstract:

    Poly(propylene carbonate)-based polyurethane elastomers (PUE-PPC) were prepared by prepolymer process with 4,4’-diphenylmethane diisocyanate (MDI) and 1,4-BDO as raw materials and the properties of elastomers were studied. The results show that, PUE-PPC exhibits better mechanical properties compared with polyether type elastomer. Meanwhile, it is more resistant to hydrolysis than polyester type elastomer, after 35 d soaking in water, the retention of tensile strength is 33% higher than that of polyester elastomer. The effects of isocyanate index (R), -NCO content in prepolymer, different chain extenders were also discussed. With decreasing R, the elongation at break increases, while tensile strength and tearing strength first increase and then decrease, and reach the maximum at R=1.05; when the NCO content increases, tensile strength and tearing strength increase, but the elongation at break reduces; the elastomer containing the shorter chain extender has excellent mechanical properties.

    参考文献
    相似文献
    引证文献
引用本文

陈伟彬,张嘉慧,刘保华.聚碳酸亚丙酯聚氨酯弹性体的合成与性能[J].高分子材料科学与工程,2014,30(11):1-5. Weibin Chen, Jiahui Zhang, Baohua Liu. Synthesis and Properties of Poly( Propylene Carbonate) Polyurethane Elastomer[J]. Polymer Materials Science & Engineering,2014,30(11):1-5.

复制
文章指标
  • 点击次数:
  • 下载次数:
  • HTML阅读次数:
  • 引用次数:
历史
  • 收稿日期:
  • 录用日期:
  • 网络出版日期:
  • 在线发布日期: 2014-11-18
  • 出版日期:
您是第      位访问者
编辑出版 :《高分子材料科学与工程》编辑部
地址 :四川省成都市一环路南一段24号 四川大学高分子研究所
电话 :028-8540 1653  E-mail:gfzclbjb@vip.sina.com
高分子材料科学与工程 ® 2026 版权所有
技术支持:北京勤云科技发展有限公司