含环糊精空腔结构三元乙丙橡胶基吸油树脂的合成与性能
DOI:
作者:
作者单位:

作者简介:

通讯作者:

中图分类号:

基金项目:

天津市高等学校科技发展基金计划项目(20120306)


Synthesis and Properties of Oil-Absorbing Resin Based on EPDM Containing Cyclodextrin Moieties
Author:
Affiliation:

Fund Project:

  • 摘要
  • |
  • 图/表
  • |
  • 访问统计
  • |
  • 参考文献
  • |
  • 相似文献
  • |
  • 引证文献
  • |
  • 资源附件
  • |
  • 文章评论
    摘要:

    通过将β-环糊精(β-CD)与甲基丙烯酸缩水甘油酯(GMA)在4-二甲氨基吡啶(DMAP)的催化作用下进行酯交换反应,在环糊精上引入多重双键结构,制备改性β-CD。采用悬浮聚合法,以三元乙丙橡胶(EPDM)为大分子单体,以不含极性基团的烯烃分子苯乙烯、改性β-CD为共聚单体进行三元共聚合,得到一种含环糊精空腔结构的新型高吸油树脂。采用傅里叶变换红外光谱、核磁共振、热重分析等表征手段对吸油树脂的结构、重复吸油性能及外场作用下的放油行为进行研究。研究结果表明,EPDM 基吸油树脂中,环糊精空腔结构的引入显著提高了吸油树脂的吸油倍率和吸油速率;吸油树脂重复使用后,吸油倍率保持稳定;吸油树脂的放油速率受到压力、温度等外场因素的影响。

    Abstract:

    β-cyclodextrin with vinyl groups (β-CD-MA) was synthesized from β-cyclodextrin (β-CD) and glycidyl methacrylate, and identified by FT-IR and 1H-NMR spectroscopy analyses. A novel type of oil-absorbing resin containing cyclodextrin moieties was prepared by suspension polymerization technique with ethylene-propylene-diene monomer (EPDM), styrene (St) and β-CD-MA as comonomers. By such methods as infrared spectroscopy and thermogravimetric analysis, the oil-absorbing resin structure, oil absorptivity, oil-absorption rate, and oil-absorption properties were studied. Otherwise, the release oil properties of oil-absorbing resin were studied at different temperature and pressure. The experiment results show that the oil absorptivity and oil-absorption rate of oil-absorbing resin based on EPDM are obviously increased by adding β-CD-MA as reaction monomer. It is proved that repeated use of the oil-absorbing resin extracted with ethanol has little effect on oil-absorption properties. Otherwise, the temperature and pressure have important effect on oil-releasing rate properties of oil-absorbing resins.

    参考文献
    相似文献
    引证文献
引用本文

周晓明,谢文杰,霍云鹏.含环糊精空腔结构三元乙丙橡胶基吸油树脂的合成与性能[J].高分子材料科学与工程,2014,30(11):6-9. Xiaoming Zhou, Wenjie Xie, Yunpeng Huo. Synthesis and Properties of Oil-Absorbing Resin Based on EPDM Containing Cyclodextrin Moieties[J]. Polymer Materials Science & Engineering,2014,30(11):6-9.

复制
文章指标
  • 点击次数:
  • 下载次数:
  • HTML阅读次数:
  • 引用次数:
历史
  • 收稿日期:
  • 录用日期:
  • 网络出版日期:
  • 在线发布日期: 2014-11-18
  • 出版日期:
您是第      位访问者
编辑出版 :《高分子材料科学与工程》编辑部
地址 :四川省成都市一环路南一段24号 四川大学高分子研究所
电话 :028-8540 1653  E-mail:gfzclbjb@vip.sina.com
高分子材料科学与工程 ® 2026 版权所有
技术支持:北京勤云科技发展有限公司