功能化离子液体的合成及对环氧树脂的改性
DOI:
作者:
作者单位:

作者简介:

通讯作者:

中图分类号:

基金项目:

辽宁省教育厅项目资助(L2014037);国家级大学生创新创业计划训练项目资助(101422013068)


Synthesis of Functionalized Ionic Liquid (PIIL) and Its Application for Modifying Epoxy Resin
Author:
Affiliation:

Fund Project:

  • 摘要
  • |
  • 图/表
  • |
  • 访问统计
  • |
  • 参考文献
  • |
  • 相似文献
  • |
  • 引证文献
  • |
  • 资源附件
  • |
  • 文章评论
    摘要:

    首先采用阳离子开环聚合法合成端羟基聚环氧氯丙烷(PECH),然后将其与N-乙基咪唑反应,制备咪唑型聚醚离子液体(PIIL),并用红外和核磁谱图对其结构进行表征。再将咪唑型聚醚离子液体与通用型环氧树脂(EP)进行共混,在苯胺固化剂作用下固化成型。用凝胶渗透色谱测定了PECH 的相对分子质量及其分布,用红外光谱和差示扫描量热仪对离子液体与环氧树脂复合产物(PIIL/EP)进行了结构表征及热性能测试,研究了PECH 相对分子质量及聚醚离子液体的含量对EP冲击强度的影响。结果表明,合成的咪唑型聚醚离子液体是目标产物,当PECH 相对分子质量为1000左右时,冲击强度较好。随着PIIL含量的增加,改性后的EP冲击强度大幅度提高,当PIIL用量为EP的50%时,冲击强度高达14.86kJ/m2,固化后的EP明显具有橡胶的弹性。

    Abstract:

    Hydroxyl-terminated poly epoxy chloropropane(PECH) was aggregated by cationic ring-opening polymerization,then PECH reacted with N-ethyl imidazole to prepare polyether imidazole ionic liquid (PIIL).The structure was characterized by infrared spectrum and nuclear magnetic spectra. Then PIIL was blended with general-purpose epoxy resin(EP).PIIL/EP was cured with aniline curing agent. The molecular weight of PECH was determined by GPC. The structure and curing performance of PIIL/EP were determined by FT-IR and DSC. The effects of PECH molecular weight and the content of PIIL on strength of EP were studied. The results show that the PIIL was the target product. The strength of the modified EP is better when the molecular weight of PECH is about 1000, and the strength is improved significantly with increase of the PIIL content. The obvious rubber elasticity of the cured EP is showed when the content of PIIL accounts for 50% and the impact strength is up to 14.86 kJ/m2.

    参考文献
    相似文献
    引证文献
引用本文

李继新,刘金麟,郭立颖,白世阳,马秀云,黄鹏程.功能化离子液体的合成及对环氧树脂的改性[J].高分子材料科学与工程,2014,30(11):10-14. Jixin Li, Jinlin Liu, Liying Guo, Shiyang Bai, Xiuyun Ma, Pengcheng Huang. Synthesis of Functionalized Ionic Liquid (PIIL) and Its Application for Modifying Epoxy Resin[J]. Polymer Materials Science & Engineering,2014,30(11):10-14.

复制
文章指标
  • 点击次数:
  • 下载次数:
  • HTML阅读次数:
  • 引用次数:
历史
  • 收稿日期:
  • 录用日期:
  • 网络出版日期:
  • 在线发布日期: 2014-11-18
  • 出版日期:
您是第      位访问者
编辑出版 :《高分子材料科学与工程》编辑部
地址 :四川省成都市一环路南一段24号 四川大学高分子研究所
电话 :028-8540 1653  E-mail:gfzclbjb@vip.sina.com
高分子材料科学与工程 ® 2026 版权所有
技术支持:北京勤云科技发展有限公司