多端烯基聚合物皮革加脂复鞣剂的合成及应用
DOI:
作者:
作者单位:

作者简介:

通讯作者:

中图分类号:

基金项目:

国家自然科学基金资助项目(21276151);陕西省重点科技创新团队(2013KCT-08);陕西科技大学科研创新团队(TD12-04)


Synthesis and Application of Multiterminal Alkenyl Polymers
Author:
Affiliation:

Fund Project:

  • 摘要
  • |
  • 图/表
  • |
  • 访问统计
  • |
  • 参考文献
  • |
  • 相似文献
  • |
  • 引证文献
  • |
  • 资源附件
  • |
  • 文章评论
    摘要:

    以季戊四醇(PER)和N,N-二羟乙基-3-胺基丙酸甲酯为原料,合成N,N-二羟乙基-3-胺基丙酸季戊四酯(HPAE);在对甲苯磺酸的催化下,使用十一烯酸(UA)对HPAE进行改性,制备出多端烯基聚合物(HPAE-UA)。通过电位滴定法优化出反应条件为:HPAE与UA的摩尔比为1∶4时,催化剂对甲苯磺酸的质量分数为0.3%,反应温度为60℃,反应时间为4h。并使用红外光谱和核磁共振等分析手段表征了HPAE-UA 的分子结构。使用激光粒度分析仪测量出HPAE-UA乳液的平均粒径为1790nm,且分布较窄,乳液的各项稳定性能良好。将HPAE-UA 应用于皮革复鞣工序中,发现复鞣后的皮革不仅热收缩温度及物理力学性能有所提高,而且皮革的手感也有一定的改善,体现了加脂复鞣的功能。

    Abstract:

    N, N-hydroxy ethyl 2-3 amino propionic acid pentaerythritol ester (HPAE) was first synthesized using pentaerythritol (PER) and N, N - dihydroxy methyl ethyl - 3 - amino propionic acid as main material. Subsequently, HPAE was modified with undecylenic acid using p-toluene sulphonic acid as catalyst. The reaction conditions were optimized by the potentiometric titration method when the mole ratio of HPAE and UA is 1∶4, the optimum reaction condition is that the mass fraction of catalyst (p-toluene sulfonic acid) is 0.3%, the reaction temperature is 60 ℃, the reaction time is 4 h. The molecular structure of HPAE-UA was characterized by FT-IR and 1H-NMR. The emulsion particle size of HPAE-UA measured by laser particle size analyzer is 1790 nm, and the distribution is relatively narrow. And the stability of emulsion is very good. Then, the HPAE-UA was applied to leather retaining process. The results show that the retained leather exhibits a higher shrinking temperature and improved mechanical properties and hand valuation, which reflects the function of fatliquoring retaining.

    参考文献
    相似文献
    引证文献
引用本文

王学川,张 婷,王海军,孙思薇.多端烯基聚合物皮革加脂复鞣剂的合成及应用[J].高分子材料科学与工程,2014,30(11):15-19. Xuechuan Wang, Ting Zhang, Haijun Wang, Siwei Sun. Synthesis and Application of Multiterminal Alkenyl Polymers[J]. Polymer Materials Science & Engineering,2014,30(11):15-19.

复制
文章指标
  • 点击次数:
  • 下载次数:
  • HTML阅读次数:
  • 引用次数:
历史
  • 收稿日期:
  • 录用日期:
  • 网络出版日期:
  • 在线发布日期: 2014-11-18
  • 出版日期:
您是第      位访问者
编辑出版 :《高分子材料科学与工程》编辑部
地址 :四川省成都市一环路南一段24号 四川大学高分子研究所
电话 :028-8540 1653  E-mail:gfzclbjb@vip.sina.com
高分子材料科学与工程 ® 2026 版权所有
技术支持:北京勤云科技发展有限公司