耐高温双酚芴改性有机硅环氧树脂的合成与表征
DOI:
作者:
作者单位:

作者简介:

通讯作者:

中图分类号:

基金项目:

国家自然科学基金资助项目(51363004);广西区自然科学基金资助项目(2012GXNSFAA053212)资助;广西特聘专家专项经费资助


Synthesis and Characterization of Organic Silicon-Modified Epoxy Resin Containing Fluorene
Author:
Affiliation:

Fund Project:

  • 摘要
  • |
  • 图/表
  • |
  • 访问统计
  • |
  • 参考文献
  • |
  • 相似文献
  • |
  • 引证文献
  • |
  • 资源附件
  • |
  • 文章评论
    摘要:

    通过双酚芴与二氯硅烷交替共聚,以环氧基团封端,制备含芴有机硅环氧树脂(EGF),并研究不同原料配比、催化剂浓度及反应时间等条件对环氧值的影响。采用红外、核磁、凝胶色谱、差示扫描量热、热重及盐酸-丙酮滴定等方法进行结构表征和性能测试。结果表明,当双酚芴与环氧氯丙烷的摩尔比为2∶10,NaOH 质量分数为50%,开闭环反应时间为4h时,合成工艺最佳。按此工艺合成EGF,其数均、重均相对分子质量分别为2237和2760,多分散系数为1.23;EGF熔点为186.6℃;其初始分解温度为363.8℃,比双酚A环氧E-51高90.3℃,比双酚芴环氧(DGEBF)高45.4℃,较两者表现出更为优异的耐热性能;EGF较E-51具有更好的耐吸湿性能。

    Abstract:

    An organic silicon-modified epoxy resin containing fluorene(EGF) was prepared by alternating copolymerization of 9,9-bis(4-hydroxyphenyl)fluorene(BHPF) with dichlorosilane, and then blocking with epoxy groups. The effect of raw materials ratio, concentration of catalyst and reaction time on the epoxy value was studied. The structure and properties of EGF were characterized by FT-IR, 1H-NMR, GPC, DSC, TGA and epoxy equivalent weight titration etc. The results show that an optimal synthetic process can be obtained when BHPF and ECH mole ratio for 2∶10, mass fraction of NaOH for 50%, and reaction time for 4 h. Mn and Mw of EGF are 2237 and 2760 respectively, and the polydispersity index is 1.23. The melting point of EGF is 186.6 ℃, and the thermogravimetric analysis shows that the onset degradation temperature of EGF is 363.8 ℃, 90.3 ℃ higher than that of E-51 and 45.4 ℃ higher than that of diglycidyl ether of bisphenol-fluorene(DGEBF), showing that EGF exhibits more excellent thermal performance and better moisture absorption resistant.

    参考文献
    相似文献
    引证文献
引用本文

钟元伟,彭锦雯,覃 洁,黄雪冰,邓卫星.耐高温双酚芴改性有机硅环氧树脂的合成与表征[J].高分子材料科学与工程,2014,30(11):26-30. Yuanwei Zhong, Jinwen Peng, Jie Qin, Xuebing Huang, Weixing Deng. Synthesis and Characterization of Organic Silicon-Modified Epoxy Resin Containing Fluorene[J]. Polymer Materials Science & Engineering,2014,30(11):26-30.

复制
文章指标
  • 点击次数:
  • 下载次数:
  • HTML阅读次数:
  • 引用次数:
历史
  • 收稿日期:
  • 录用日期:
  • 网络出版日期:
  • 在线发布日期: 2014-11-18
  • 出版日期:
您是第      位访问者
编辑出版 :《高分子材料科学与工程》编辑部
地址 :四川省成都市一环路南一段24号 四川大学高分子研究所
电话 :028-8540 1653  E-mail:gfzclbjb@vip.sina.com
高分子材料科学与工程 ® 2026 版权所有
技术支持:北京勤云科技发展有限公司