Abstract:Polyimide nanofiber(PI) was prepared by the traditional two-step process, and the nanofibers of precursor polyamic acid(PAA) were prepared by electro-spinning. The polyimide nanofibers were obtained through thermal imidization of different time. The influences of different imidization time on micro topography, chemical structure, thermostability and mechanical properties, etc of the polyimide nanofibers were studied and characterized by Fourier transform infrared spectroscope(FT-IR), wide angle X-ray diffraction(WAXD), scanning electronic microscope (SEM), thermal gravimetry analysis(TGA) and mechanical measurement. The results show that the imidization of poly(amic acid) nanofibers is not complete for short time but complete for about 30 min. With increasing of the imidization time, the crystallinity of the PI nanofibers increases, the PI nanofibers become more fine and more smooth, the thermostability of polyimide nanofibers is improved ,and the break strength and elongation at break of the nanofiber films increase. The gas permeability of the PI nanofiber membranes was tested and the results show that the gas permeability increases with rise of the imidization time.