单宁与聚磷酸铵复配体系对聚丁二酸丁二酯的催化成炭作用
DOI:
作者:
作者单位:

作者简介:

通讯作者:

中图分类号:

基金项目:

国家自然科学基金资助项目(51203137)


Catalytic Charring Effect of Tannin and Ammonium Polyphosphate on Poly(Butylene Succinate)
Author:
Affiliation:

Fund Project:

  • 摘要
  • |
  • 图/表
  • |
  • 访问统计
  • |
  • 参考文献
  • |
  • 相似文献
  • |
  • 引证文献
  • |
  • 资源附件
  • |
  • 文章评论
    摘要:

    采用热失重分析仪、微型量热仪及扫描电镜研究了单宁(Tannin)与聚磷酸铵(APP)复配体系对聚丁二酸丁二酯(PBS)的催化成炭作用以及炭层对其燃烧行为的影响。热失重分析表明,无论在空气还是氮气下,APP与Tannin复配使用都可以催化PBS体系成炭。当APP与Tannin的质量比为3∶1时,在空气中PBS体系700 ℃时残炭的实验值为9.3%,在氮气中残炭的实验值为11.3%,都远远高于理论计算值。微型量热仪分析显示,炭层可以作为基体与火焰之间的屏障,尤其当APP与Tannin的比例为5∶1时,PHRR降低了33%。此外,残炭形貌分析表明,APP和Tannin复配使用后,材料表面形成较为均匀、致密的炭层结构。

    Abstract:

    The catalytic charing effect of combination of ammonium polyphosphate (APP) and tannin and its influence on flammability of poly (butylene succinate) (PBS) were investigated by thermogravimetric analysis (TG), microscale combustion calorimeter (MCC) and scanning electron microscopy (SEM). TG analyses show that combination of APP and tannin could catalyze char formation of PBS system whether in nitrogen or air atmosphere. When the mas ratio of APP and tannin is 3∶1, the experiment mass of char residue at 700 ℃ is 9.3% in air and is 11.3% in N2, which are much larger than the calculated values. MCC indicates that the char could be acted as a barrier to isolate the material from flame. Especially when the mass ratio of APP and tannin is 5∶1, the peak heat release rate (PHRR) could be reduced by 33%. The morphology examined by SEM reveals that the char residue of PBS/APP/tannin is uniform and compact when the combination of APP and tannin is added.

    参考文献
    相似文献
    引证文献
引用本文

冉诗雅,陈 超,徐灵钢,郭正虹.单宁与聚磷酸铵复配体系对聚丁二酸丁二酯的催化成炭作用[J].高分子材料科学与工程,2014,30(11):107-111. Shiya Ran, Chao Chen, Linggang Xu, Zhenghong Guo. Catalytic Charring Effect of Tannin and Ammonium Polyphosphate on Poly(Butylene Succinate)[J]. Polymer Materials Science & Engineering,2014,30(11):107-111.

复制
文章指标
  • 点击次数:
  • 下载次数:
  • HTML阅读次数:
  • 引用次数:
历史
  • 收稿日期:
  • 录用日期:
  • 网络出版日期:
  • 在线发布日期: 2014-11-18
  • 出版日期:
您是第      位访问者
编辑出版 :《高分子材料科学与工程》编辑部
地址 :四川省成都市一环路南一段24号 四川大学高分子研究所
电话 :028-8540 1653  E-mail:gfzclbjb@vip.sina.com
高分子材料科学与工程 ® 2026 版权所有
技术支持:北京勤云科技发展有限公司