叶片挤出机熔体压力响应及挤出特性
DOI:
作者:
作者单位:

作者简介:

通讯作者:

中图分类号:

基金项目:

国家自然科学基金联合基金项目(U1201242);华南理工大学中央高校基本科研业务费资助项目(2013ZZ0015,2014ZB0021,2013ZM0014)


Melt Pressure Response and Extrusion Characteristics in Vane Extruder
Author:
Affiliation:

Fund Project:

  • 摘要
  • |
  • 图/表
  • |
  • 访问统计
  • |
  • 参考文献
  • |
  • 相似文献
  • |
  • 引证文献
  • |
  • 资源附件
  • |
  • 文章评论
    摘要:

    利用自行研制的叶片挤出机实验研究了工艺参数对熔体压力及挤出产量的影响,分析了叶片挤出机的挤出特性、成型加工过程中熔体压力的动态特性及响应。结果表明,在叶片挤出机中熔体压力随时间周期性脉动变化,实现了脉动压力诱导的挤出成型过程;熔体压力的脉动频率为转子轴角频率的4倍;脉动幅值随转子轴转速的增加而增加,沿挤出方向逐渐减小,口模压力对脉动幅值的影响较小。与常规单螺杆挤出机相比,叶片挤出机具有正位移输送特性,口模压力、物料特性等对产量的影响小,设备挤出特性“硬”。

    Abstract:

    The influence of processing parameters on melt pressure and output was studied on the self-developed vane extruder. The extrusion characteristics and the response of melt pressure during molding were analyzed in real-time scale. The experimental results show that pulsating pressure was introduced into the extrusion process by the dynamic convergent-divergent flow channel of the vane extruder. The pulsating frequency of melt pressure is four times of the rotor angular frequency. The pulsating amplitude of melt pressure increases with increase of the rotor speed. And the pulsating amplitude of melt pressure decreases along the extrusion direction. The die pressure exerts little influence on the pulsating amplitude of melt pressure. Compared with conventional single screw extruder, the vane extruder was characterized by positive displacement conveying and short thermo-mechanical history. The die pressure and material characteristics have little influence on the extrusion output.

    参考文献
    相似文献
    引证文献
引用本文

殷小春,汤 邦,余忠伟,杨智韬,张桂珍,瞿金平.叶片挤出机熔体压力响应及挤出特性[J].高分子材料科学与工程,2014,30(11):117-121. Xiaochun Yin, Bang Tang, Zhongwei Yu, Zhitao Yang, Guizhen Zhang, Jinping Qu. Melt Pressure Response and Extrusion Characteristics in Vane Extruder[J]. Polymer Materials Science & Engineering,2014,30(11):117-121.

复制
文章指标
  • 点击次数:
  • 下载次数:
  • HTML阅读次数:
  • 引用次数:
历史
  • 收稿日期:
  • 录用日期:
  • 网络出版日期:
  • 在线发布日期: 2014-11-18
  • 出版日期:
您是第      位访问者
编辑出版 :《高分子材料科学与工程》编辑部
地址 :四川省成都市一环路南一段24号 四川大学高分子研究所
电话 :028-8540 1653  E-mail:gfzclbjb@vip.sina.com
高分子材料科学与工程 ® 2026 版权所有
技术支持:北京勤云科技发展有限公司