四脚氧化锌晶须/氢化环氧树脂形状记忆复合材料的制备与性能
DOI:
作者:
作者单位:

作者简介:

通讯作者:

中图分类号:

基金项目:


Preparation and Shape Memory Behaviors of Zinc Oxide Whisker Reinforced Hydro Epoxy Composites
Author:
Affiliation:

Fund Project:

  • 摘要
  • |
  • 图/表
  • |
  • 访问统计
  • |
  • 参考文献
  • |
  • 相似文献
  • |
  • 引证文献
  • |
  • 资源附件
  • |
  • 文章评论
    摘要:

    采用不同比例的四脚氧化锌晶须(T-ZnOw)与氢化环氧树脂(H-EP)共混,在聚丙二醇二缩水甘油醚(PPGDGE)和异佛尔酮二胺用量不变的前提下,经完全固化制备出一种新型的复合材料。通过动态力学性能测试、力学测试、红外光谱、扫描电子显微镜和U 型形状记忆测试系统地研究了该体系的力学性能和形状记忆性能。实验结果表明,该体系复合材料的玻璃化转变温度最高可达到61.5℃,其力学性能比纯环氧树脂提高了15.87%。该试样具有良好的形状记忆性能,变形的试样几乎可以完全回复。

    Abstract:

    A novel shape memory hydro-epoxy resin composite was prepared with hydro-epoxy poly(propylene glycol) diglycidyl ether (PPGDGE) and isophorone diamine (IPDA), its mixture with different content of zinc oxide whisker and hydro-epoxy. DMA, bend test, FT-IR, SEM and U type shape memory test were used to systematically investigate mechanical and shape memory properties of these materials. The results indicate that the highest glass transition temperature (Tg) can reach 61.5℃. The mechanical properties of these deformation samples increase by 15.87% than those of pure epoxy. Those deformation samples have good shape memory performance, which can be recovered almost completely.

    参考文献
    相似文献
    引证文献
引用本文

刘婷婷,朱光明,魏 堃,王永坤,刘 哲.四脚氧化锌晶须/氢化环氧树脂形状记忆复合材料的制备与性能[J].高分子材料科学与工程,2014,30(11):155-159. Tingting Liu, Guangming Zhu, Kun Wei, Yongkun Wang, Zhe Liu. Preparation and Shape Memory Behaviors of Zinc Oxide Whisker Reinforced Hydro Epoxy Composites[J]. Polymer Materials Science & Engineering,2014,30(11):155-159.

复制
文章指标
  • 点击次数:
  • 下载次数:
  • HTML阅读次数:
  • 引用次数:
历史
  • 收稿日期:
  • 录用日期:
  • 网络出版日期:
  • 在线发布日期: 2014-11-18
  • 出版日期:
您是第      位访问者
编辑出版 :《高分子材料科学与工程》编辑部
地址 :四川省成都市一环路南一段24号 四川大学高分子研究所
电话 :028-8540 1653  E-mail:gfzclbjb@vip.sina.com
高分子材料科学与工程 ® 2026 版权所有
技术支持:北京勤云科技发展有限公司