双马来酰亚胺/蒙脱土纳米复合材料的制备及表征
DOI:
作者:
作者单位:

作者简介:

通讯作者:

中图分类号:

基金项目:

航空科学基金(2011ZF54018)


Preparation and Characterization of Bismaleimide/Montmorillonite Nanocomposites
Author:
Affiliation:

Fund Project:

  • 摘要
  • |
  • 图/表
  • |
  • 访问统计
  • |
  • 参考文献
  • |
  • 相似文献
  • |
  • 引证文献
  • |
  • 资源附件
  • |
  • 文章评论
    摘要:

    利用有机蒙脱土(OMMT)对双马来酰亚胺(BMI)树脂进行改性制备纳米复合材料。采用X 射线衍射、透射电子显微镜对材料的微观结构进行表征,研究了纳米复合材料的弯曲性能、冲击性能以及动态力学性能。结果表明,当OMMT的质量分数为1%时,蒙脱土的片层被充分剥离,纳米复合材料的弯曲强度、弯曲模量和冲击强度均达到最大值,冲击断口形貌显示材料由改性前的脆性断裂转变为韧性断裂。同时,纳米复合材料的玻璃化转变温度(Tg)也得到提高。

    Abstract:

    The bismaleimide (BMI) nanocomposites were prepared with organo-montmorillonite (OMMT). The microstructures of nanocomposites were characterized by XRD and TEM. The flexural properties, impact property and dynamic mechanical properties of nanocomposites were studied. The results indicate that the layers of OMMT are exfoliated sufficiently when the mass fraction of OMMT is 1% in the resin. Moreover, the flexural strength, modulus of elasticity and impact strength of nanocomposite reach the maximum values. The impact fracture morphologies show that the nanocomposite has ductile fracture mode and the pure BMI resin has brittle one. The glass transition temperature (Tg) of nanocomposite is also improved.

    参考文献
    相似文献
    引证文献
引用本文

李 伟,赵焕伟,周保全,徐 颖,张岩东,金颐如.双马来酰亚胺/蒙脱土纳米复合材料的制备及表征[J].高分子材料科学与工程,2014,30(11):165-167. Wei Li, Huanwei Zhao, Baoquan Zhou, Ying Xu, Yandong Zhang, Yiru Jin. Preparation and Characterization of Bismaleimide/Montmorillonite Nanocomposites[J]. Polymer Materials Science & Engineering,2014,30(11):165-167.

复制
文章指标
  • 点击次数:
  • 下载次数:
  • HTML阅读次数:
  • 引用次数:
历史
  • 收稿日期:
  • 录用日期:
  • 网络出版日期:
  • 在线发布日期: 2014-11-18
  • 出版日期:
您是第      位访问者
编辑出版 :《高分子材料科学与工程》编辑部
地址 :四川省成都市一环路南一段24号 四川大学高分子研究所
电话 :028-8540 1653  E-mail:gfzclbjb@vip.sina.com
高分子材料科学与工程 ® 2026 版权所有
技术支持:北京勤云科技发展有限公司