具有核壳结构聚氯乙烯-聚苯胺合金材料的制备与性能
DOI:
作者:
作者单位:

作者简介:

通讯作者:

中图分类号:

基金项目:

陕西省“13115”科技创新工程重大科技专项(2009ZDKG-62);国家自然科学基金面上项目(51173145)


Preparation and Properties of Polyvinyl Chloride/Polyanilne Blends with Core-Shell Structure
Author:
Affiliation:

Fund Project:

  • 摘要
  • |
  • 图/表
  • |
  • 访问统计
  • |
  • 参考文献
  • |
  • 相似文献
  • |
  • 引证文献
  • |
  • 资源附件
  • |
  • 文章评论
    摘要:

    以微发泡聚氯乙烯(PVC)为模板,以十二烷基苯磺酸(DBSA)水溶液为掺杂剂和酸性介质,通过原位聚合法成功制备了PVC-聚苯胺(PANI)导电合金,应用元素分析、红外光谱、扫描电镜、四探针电导测试表征了PVC-PANI合金粉体的结构与性能,并论证了掺杂机理。结果表明,PVC-PANI合金具有表面镶嵌包覆、内部局部交联的结构;PANI在复合粉体中的质量分数达到了10.28%,电导率达到80 S/m;以PVC-PANI合金粉体为填料,所得PVC-PANI/PVC共混物材料的导电逾渗阈值在聚苯胺质量分数为2.0%~3.3%时,PVC- PANI/PVC共混物材料的电阻率急剧下降(109 Ω·cm→106 Ω·cm),实现了PVC的导电功能化。

    Abstract:

    Polyvinyl chloride (PVC)-polyanilne (PANI) alloy was successfully prepared by in-situ polymerization based on micro-foaming PVC and using dodecylbenzene sulfonic acid (DBSA) aqueous solution as doping agent and acid medium. The structure and properties of PVC-PANI blend were investigated by elemental analysis, scanning electron microscopy (SEM), Fourier transform infrared spectroscopy (FT-IR) and four point probe conductivity test, and then the doping mechanism of DBSA to PVC-PANI blend was demonstrated. The results show that the embedded PVC-PANI alloy has core-shell structure of coating PANI to PVC surface and interior local crosslinking structure; mass fraction of PANI in the blend powder reaches 10.28%, and the electrical conductivity of PVC-PANI blend is 80 S/m. With PVC-PANI alloy powder as electrical conductive filler, when mass fraction of polyaniline is 2.0%~3.3%, the resistivity of PVC-PANI/PVC composites falls sharply from 109 Ω·cm to 106 Ω·cm, realized the conductive function of PVC.

    参考文献
    相似文献
    引证文献
引用本文

李侃社, 忻圣强, 牛红梅, 闫兰英.具有核壳结构聚氯乙烯-聚苯胺合金材料的制备与性能[J].高分子材料科学与工程,2014,30(12):81-87. Kanshe Li, Shengqiang Xin, Hongmei Niu, Lanying Yan. Preparation and Properties of Polyvinyl Chloride/Polyanilne Blends with Core-Shell Structure[J]. Polymer Materials Science & Engineering,2014,30(12):81-87.

复制
文章指标
  • 点击次数:
  • 下载次数:
  • HTML阅读次数:
  • 引用次数:
历史
  • 收稿日期:
  • 录用日期:
  • 网络出版日期:
  • 在线发布日期: 2014-12-12
  • 出版日期:
您是第      位访问者
编辑出版 :《高分子材料科学与工程》编辑部
地址 :四川省成都市一环路南一段24号 四川大学高分子研究所
电话 :028-8540 1653  E-mail:gfzclbjb@vip.sina.com
高分子材料科学与工程 ® 2026 版权所有
技术支持:北京勤云科技发展有限公司