Abstract:The oil-absorbing resin based on EPDM rubber was used as solid skeleton for adsorption of phase change material such as paraffin or polyethylene glycol (PEG) to prepare solid-solid phase change materials (PCM), respectively. Structure and phase change behaviors of PCMs were studied by DSC and FT-IR, and the phase change process of the PCMs was observed by using reflection mode of PLM. The experimental results show that the melting enthalpy of phase change of PCMs using paraffin and PEG as phase change materials is 140.8 KJ/g and 7.5 KJ/g respectively, and the crystal enthalpy of phase change of PCMs is 137.2 kJ/g and 2.8 kJ/g, respectively. Otherwise, during dynamic phase change process, the different surface morphology of PCMs can be observed for two kinds of phase change materials. During the transition, the whole PCMs are remained in solid state, and the phase transitions are all reversible.