丁腈橡胶/顺丁橡胶-接枝马来酸酐共混物的制备与性能
DOI:
作者:
作者单位:

作者简介:

通讯作者:

中图分类号:

基金项目:


Preparation and Properties of Nitrile Butadiene Rubber/Butadiene Rubber -g-MAH Blends
Author:
Affiliation:

Fund Project:

  • 摘要
  • |
  • 图/表
  • |
  • 访问统计
  • |
  • 参考文献
  • |
  • 相似文献
  • |
  • 引证文献
  • |
  • 资源附件
  • |
  • 文章评论
    摘要:

    以过氧化二异丙苯(DCP)为引发剂,在双辊开炼机上采用马来酸酐(MAH)单体对顺丁橡胶(BR)进行接枝改性,通过红外光谱对其结构进行了表征;采用化学滴定法测定了反应产物中MAH的接枝率。接枝后的BR与丁腈橡胶(NBR)共混,制备了NBR/BR-g-MAH共混物,对共混物的力学性能、耐低温性能、热老化性能和耐油性能进行了测试和分析。结果表明,BR进行MAH接枝后,提高了NBR/BR-g-MAH共混物力学性能,提高了NBR低温性能,随着BR用量的增加,共混物料低温性能提高,但耐油性能下降,兼顾耐油性能和耐低温性能的最佳条件为m(NBR)∶m(BR-g-MAH)=85∶15。

    Abstract:

    In order to improve properties of butadiene rubber (BR), maleic anhydride (MAH) and dicumyl peroxide (DCP) were used as monomers and initiator in graft modification of BR by a two-roll mill. The structure of grafting polymers and the graft ratio of MAH were analyzed by FT-IR and the reaction of chemical titration. NBR/BR-g-MAH blends were prepared through simple blending the grafted BR and nitrile rubber (NBR). The mechanical properties, low temperature resistance, heat aging resistance and oil resistance of NBR/BR-g-MAH were examined. It is found that mechanical properties of NBR/BR-g-MAH and low temperature resistance of NBR are increased at the presence of the MAH in grafting polymers. This increase of low temperature resistance and decrease of oil resistance are affected by increasing the content of BR. The optimal mass ratio used for both NBR∶BR-g-MAH systems is 85∶15.

    参考文献
    相似文献
    引证文献
引用本文

董添, 冷传东, 高琳, 谢冬雪, 胡飞飞.丁腈橡胶/顺丁橡胶-接枝马来酸酐共混物的制备与性能[J].高分子材料科学与工程,2014,30(12):165-171. Tian Dong, Chuandong Leng, Lin Gao, Dongxue Xie, Feifei Hu, Guijuan Li. Preparation and Properties of Nitrile Butadiene Rubber/Butadiene Rubber -g-MAH Blends[J]. Polymer Materials Science & Engineering,2014,30(12):165-171.

复制
文章指标
  • 点击次数:
  • 下载次数:
  • HTML阅读次数:
  • 引用次数:
历史
  • 收稿日期:
  • 录用日期:
  • 网络出版日期:
  • 在线发布日期: 2014-12-12
  • 出版日期:
您是第      位访问者
编辑出版 :《高分子材料科学与工程》编辑部
地址 :四川省成都市一环路南一段24号 四川大学高分子研究所
电话 :028-8540 1653  E-mail:gfzclbjb@vip.sina.com
高分子材料科学与工程 ® 2026 版权所有
技术支持:北京勤云科技发展有限公司