一种具有“核-须”结构的热响应性微凝胶
DOI:
作者:
作者单位:

作者简介:

通讯作者:

中图分类号:

基金项目:

中国博士后科学基金面上项目(2012M521007);中国博士后科学基金特别资助项目(2013T60563)


A Kind of Thermal Responsive Micro-Gel with "Core-Chain" Structure
Author:
Affiliation:

Fund Project:

  • 摘要
  • |
  • 图/表
  • |
  • 访问统计
  • |
  • 参考文献
  • |
  • 相似文献
  • |
  • 引证文献
  • |
  • 资源附件
  • |
  • 文章评论
    摘要:

    利用电子转移活化再生原子转移自由基聚合反应(ARGET ATRP),制备出一种以交联环糊精为核,核表面接枝聚N-异丙基丙烯酰胺长链为须的聚合物微凝胶。利用傅里叶红外光谱仪、元素分析仪和综合热分析仪对合成产物进行了表征。激光粒度分析仪检测显示微凝胶的粒径为1.416 μm。当环境温度变化时,在34 ℃附近,粒径从1.416 μm急剧降低到1.388 μm,显示出良好的热响应性能。微凝胶的吸附试验表明,微凝胶“核”中大量环糊精单元的存在使其对底物分子表现良好的负载能力,对亚甲基蓝的吸附量达到128.3mg/g。而且由于微凝胶表面热敏“长须”的存在,微凝胶在25 ℃和37 ℃表现出不同的负载能力,表明产物具有良好的可控吸附性能。同样,微凝胶的“核-须”结构在不同温度下也表现出可控的释放性能。

    Abstract:

    By activators regenerated by electron transfer for atom transfer radical polymerization (ARGET ATRP), a kind of polymer micro-gel was prepared, which is comprised of a cross-linked cyclodextrin core and poly N-isopropyl acrylamide long chains grafted on it. The obtained products were characterized by Fourier transform infrared spectroscopy, elemental analysis and integrated thermal analysis. The size of micro-gels particle is 1.416 μm determined by laser particle size analyzer. It is found that the particle size drastically reduces from 1.416 μm to 1.388 μm at around 34 ℃, when the ambient temperature changes. Absorption tests of micro-gels show that cross-linked cyclodextrin "core" has good load capacity, and the absorption amount of methylene blue is tested to be as high as 128.3 mg/g. Different load capacity of micro-gels displaying at 25 ℃ and 37 ℃ confirms that the prepared micro-gel has good temperature responsibility. Furthermore, the releasing experiments indicate that the thermo-responsive micro-gel exhibits outstanding controlled release property.

    参考文献
    相似文献
    引证文献
引用本文

徐兴龙, 胡杰, 吴新振, 陈小平, 沈眈.一种具有“核-须”结构的热响应性微凝胶[J].高分子材料科学与工程,2015,31(1):19-25. Xinglong Xu, Jie Hu, Xinzhen Wu, Xiaoping Chen, Dan Shen. A Kind of Thermal Responsive Micro-Gel with "Core-Chain" Structure[J]. Polymer Materials Science & Engineering,2015,31(1):19-25.

复制
文章指标
  • 点击次数:
  • 下载次数:
  • HTML阅读次数:
  • 引用次数:
历史
  • 收稿日期:
  • 录用日期:
  • 网络出版日期:
  • 在线发布日期: 2015-02-01
  • 出版日期:
您是第      位访问者
编辑出版 :《高分子材料科学与工程》编辑部
地址 :四川省成都市一环路南一段24号 四川大学高分子研究所
电话 :028-8540 1653  E-mail:gfzclbjb@vip.sina.com
高分子材料科学与工程 ® 2026 版权所有
技术支持:北京勤云科技发展有限公司