双原位细乳液聚合法制备聚苯乙烯-聚甲基丙烯酸甲酯复合微球
DOI:
作者:
作者单位:

作者简介:

通讯作者:

中图分类号:

基金项目:

国家自然科学基金资助项目(51173001)


Morphologies of Polystyrene- Polymethylmethacrylate Composite Microspheres Fabricated via in Dual-Situ Miniemulsion Polymerization
Author:
Affiliation:

Fund Project:

  • 摘要
  • |
  • 图/表
  • |
  • 访问统计
  • |
  • 参考文献
  • |
  • 相似文献
  • |
  • 引证文献
  • |
  • 资源附件
  • |
  • 文章评论
    摘要:

    以苯乙烯(St)、正硅酸乙酯(TEOS)、二乙烯基苯(DVB)为主要原料,采用双原位细乳液工艺和不同引发体系,制备SiO2/PS复合微球,并以此为种子乳液,继续滴加第2种单体甲基丙烯酸甲酯(MMA),合成聚苯乙烯-聚甲基丙烯酸甲酯(PS-PMMA)复合微球;通过红外光谱、透射电镜、热重分析等测试手段对复合微球进行结构和形貌的表征。结果表明,复合微球制备成功,其中包覆的无机粒子SiO2增加了微球的交联度和热稳定性;引发剂类型对复合微球的形貌和粒径影响很大,不同的乳化剂也对复合微球的形貌产生较大影响。

    Abstract:

    The polystyrene (PS)/SiO2 composite microspheres were synthesized by double in situ miniemulsion polymerization with styrene(St), ethyl silicate (TEOS), divinyl benzene(DVB) as major materials. Different type of initiators were used to prepare PS/SiO2 composite microspheres which were used as seeds, then PS-PMMA composite microspheres were synthesized by dropping the second monomer methylmethacrylate (MMA). The products were characterized by FT-IR, TEM and TGA, respectively. The results indicate that PS-PMMA composite microspheres were synthesized successfully. The coated SiO2 particles are helpful to improve the crosslinking degree and thermal stability of PS-PMMA composite microspheres; the type of initiators significantly affects the morphologies and particle sizes; different emulsifiers also have great effect on the morphologies.

    参考文献
    相似文献
    引证文献
引用本文

王云云, 杨建军, 张建安, 吴明元, 吴庆云.双原位细乳液聚合法制备聚苯乙烯-聚甲基丙烯酸甲酯复合微球[J].高分子材料科学与工程,2015,31(1):26-30. Yunyun Wang, Jianjun Yang, Jian’an Zhang, Mingyuan Wu, Qingyun Wu. Morphologies of Polystyrene- Polymethylmethacrylate Composite Microspheres Fabricated via in Dual-Situ Miniemulsion Polymerization[J]. Polymer Materials Science & Engineering,2015,31(1):26-30.

复制
文章指标
  • 点击次数:
  • 下载次数:
  • HTML阅读次数:
  • 引用次数:
历史
  • 收稿日期:
  • 录用日期:
  • 网络出版日期:
  • 在线发布日期: 2015-02-01
  • 出版日期:
您是第      位访问者
编辑出版 :《高分子材料科学与工程》编辑部
地址 :四川省成都市一环路南一段24号 四川大学高分子研究所
电话 :028-8540 1653  E-mail:gfzclbjb@vip.sina.com
高分子材料科学与工程 ® 2026 版权所有
技术支持:北京勤云科技发展有限公司