LED封装用有机硅材料的制备与性能
DOI:
作者:
作者单位:

作者简介:

通讯作者:

中图分类号:

基金项目:

天津市科技支撑计划项目(14ZCZDGX00010)


Preparation and Performance of Silicone Materials for LED Encapsulation
Author:
Affiliation:

Fund Project:

  • 摘要
  • |
  • 图/表
  • |
  • 访问统计
  • |
  • 参考文献
  • |
  • 相似文献
  • |
  • 引证文献
  • |
  • 资源附件
  • |
  • 文章评论
    摘要:

    以γ-(2,3环氧丙氧)丙基三甲氧基硅烷(KH560)和二苯基硅二醇(DPSD)为原料通过缩聚反应制备出带有苯基和环氧基团的高折光指数有机硅聚合物。研究了催化剂、反应温度、反应时间、反应物的摩尔比对苯基环氧基有机硅聚合物性能的影响,确定出最佳反应条件——反应温度为50 ℃,反应时间为12 h,反应物KH560和DPSD的摩尔比为1∶1。通过傅里叶变换红外光谱和核磁共振对其结构进行了表征。与甲基六氢苯酐固化后得到透明的有机硅封装材料,并对固化后的有机硅封装材料进行了耐热性能和力学性能的表征。结果表明,有机硅封装材料具有较高的折光指数(1.547),较高的透光率(95%),优异的粘接性、良好的耐热性(热分解温度>290 ℃)以及力学性能,可以用于发光二极管(LED)封装领域。

    Abstract:

    High refractive index organic silicone material containing phenyl and epoxy groups was prepared by condensation polymerization reaction using γ-(2,3-epoxypropoxy)propyltrimethoxysilane (KH560) and diphenylsilanediol (DPSD). The influences of reaction factors such as catalyst, reaction temperature, reaction time and phenyl content on the organic silicone materials were investigated. The preferred reaction conditions are reaction temperature 50 ℃, reaction time 12h, mole ratio of KH560 and DPSD 1∶1. The structure of materials was characterized by FT-IR and 1H-NMR. The thermal resistant properties and mechanical properties of transparent organic silicone encapsulating materials were investigated after using hexahydro-4-methylphthalic anhydride (MeHHPA) as curing agent. The results show that the organic silicone encapsulating materials have higher refractive index (1.547), higher transmittance (99%), excellent adhesion, good heat resistant (thermal decomposition temperature >290 ℃) and mechanical properties. This high refractive index organic silicon material containing phenyl and epoxy groups might be applied for light emitting diodes (LED) encapsulation.

    参考文献
    相似文献
    引证文献
引用本文

李媛, 赵苗, 李光, 冯亚凯, 谭晓华, 韩颖, 孙绪筠. LED封装用有机硅材料的制备与性能[J].高分子材料科学与工程,2015,31(1):41-45. Yuan Li, Miao Zhao, Guang Li, Yakai Feng, Xiaohua Tan, Ying Han, Xujun Sun. Preparation and Performance of Silicone Materials for LED Encapsulation[J]. Polymer Materials Science & Engineering,2015,31(1):41-45.

复制
文章指标
  • 点击次数:
  • 下载次数:
  • HTML阅读次数:
  • 引用次数:
历史
  • 收稿日期:
  • 录用日期:
  • 网络出版日期:
  • 在线发布日期: 2015-02-01
  • 出版日期:
您是第      位访问者
编辑出版 :《高分子材料科学与工程》编辑部
地址 :四川省成都市一环路南一段24号 四川大学高分子研究所
电话 :028-8540 1653  E-mail:gfzclbjb@vip.sina.com
高分子材料科学与工程 ® 2026 版权所有
技术支持:北京勤云科技发展有限公司