干法酯化淀粉/聚乳酸复合材料——混合比例对性能的影响
DOI:
作者:
作者单位:

作者简介:

通讯作者:

中图分类号:

基金项目:

中央高校基本科研业务费专项(DL13CB13);国家自然科学基金青年基金资助项目(31200442)


Dry Method Esterified Starch/Polylactic Acid Composites——Effect of Mixing Ratio on the Properties
Author:
Affiliation:

Fund Project:

  • 摘要
  • |
  • 图/表
  • |
  • 访问统计
  • |
  • 参考文献
  • |
  • 相似文献
  • |
  • 引证文献
  • |
  • 资源附件
  • |
  • 文章评论
    摘要:

    采用干法马来酸酐酯化玉米淀粉和聚乳酸(PLA)进行熔融共混制备可降解复合材料。采用X射线衍射、热重分析和扫描电镜对复合材料的结晶结构、热分解特征和断面形貌进行了表征,从而研究酯化淀粉/PLA混合比例对相容性的影响。并对复合材料的力学性能、吸水率以及流变性能进行了测试。实验结果表明,随着酯化淀粉/PLA比例减小,复合材料中两相的相互依赖性增大,拉伸强度和弯曲强度增大,断裂伸长率和吸水率降低。流变性能测试结果表明,随着酯化淀粉比例增多,复合材料的储能模量增大,复数黏度降低。

    Abstract:

    Dry method esterified corn starch/polylactic acid (PLA) composites were prepared by melt extrusion. In order to study the effect of esterified starch/PLA mixing ratio on the compatibility of composites, XRD, TGA and SEM were used to characterize the crystal structure, thermal decomposition characteristics and fracture morphology of the composites. And the mechanical properties, water absorption rate and rheological properties of the composites were also tested. The experimental results show that, with reducing the esterified starch/PLA mass ratio, the interdependence of two-phase in composite is increased, and the tensile strength and bending strength are increased, but the elongation at break and the water absorption rate are decreased. The test results of rheological properties show that, with increasing the esterified starch mass ratio, the storage modulus of the composites is increased, but the complex viscosity is decreased.

    参考文献
    相似文献
    引证文献
引用本文

左迎峰, 顾继友, 乔治邦, 谭海彦, 张彦华.干法酯化淀粉/聚乳酸复合材料——混合比例对性能的影响[J].高分子材料科学与工程,2015,31(1):72-77. Yingfeng Zuo, Jiyou Gu, Zhibang Qiao, Haiyan Tan, Yanhua Zhang. Dry Method Esterified Starch/Polylactic Acid Composites——Effect of Mixing Ratio on the Properties[J]. Polymer Materials Science & Engineering,2015,31(1):72-77.

复制
文章指标
  • 点击次数:
  • 下载次数:
  • HTML阅读次数:
  • 引用次数:
历史
  • 收稿日期:
  • 录用日期:
  • 网络出版日期:
  • 在线发布日期: 2015-02-01
  • 出版日期:
您是第      位访问者
编辑出版 :《高分子材料科学与工程》编辑部
地址 :四川省成都市一环路南一段24号 四川大学高分子研究所
电话 :028-8540 1653  E-mail:gfzclbjb@vip.sina.com
高分子材料科学与工程 ® 2026 版权所有
技术支持:北京勤云科技发展有限公司