β-成核剂对聚丙烯/木粉复合材料结晶与力学性能的影响
DOI:
作者:
作者单位:

作者简介:

通讯作者:

中图分类号:

基金项目:

林业公益性行业科研专项(201204802);国家自然科学基金资助项目(31170529);中央高校基本科研业务费专项资金(DL11BB37)


Influence of β Nucleating Agent on the Crystallization and Mechanical Properties of PP /Wood Flour Composites
Author:
Affiliation:

Fund Project:

  • 摘要
  • |
  • 图/表
  • |
  • 访问统计
  • |
  • 参考文献
  • |
  • 相似文献
  • |
  • 引证文献
  • |
  • 资源附件
  • |
  • 文章评论
    摘要:

    通过挤出成型法制备聚丙烯/木粉复合材料(PP/WF),添加一种镧系稀土金属络合物(WBG)成核剂诱导PP/WF复合材料中等规聚丙烯(iPP)形成β晶型。以差示扫描量热和X射线衍射为表征方法,分析成核剂对PP/WF结晶行为的作用,进而研究其对力学性能的影响。结果表明,WBG成核剂能有效地诱导PP/WF产生β-iPP结晶,当WBG的添加量为m(WBG)/m(PP)=0.3/100时其产生的β晶相对含量达到78.75%,β-iPP的相对含量还与PP/WF的冷却速率密切相关;添加WBG提高了复合材料中iPP的结晶温度;WBG成核剂能显著改善复合材料的冲击韧性,但对弯曲和拉伸性能略有不利影响。

    Abstract:

    The rare earth metal complexes(called WBG) nucleating agent was added to the polypropylene /wood flour (PP/WF) composites by extrusion to induce the β phase crystallization of PP in the composite. The resulting composites were characterized by X-ray diffraction and differential scanning calorimetry. The mechanical properties were also tested. The results indicate that addition of WBG induces PP in the composite to form β-crystal (β-iPP) efficiently during the crystallization and improve the crystallization temperature of the composites, but the content of β-iPP is influenced by the cooling rate. The relative content of β-iPP can be as high as 78.75% when the dosage of WBG is m(WBG)/m(PP)=0.3/100. PP/WF composites with β-iPP crystal exhibit significant improvement on the impact strength while slight decrease on the flexural strength and tensile strength.

    参考文献
    相似文献
    引证文献
引用本文

黄浪, 王海刚, 王清文.β-成核剂对聚丙烯/木粉复合材料结晶与力学性能的影响[J].高分子材料科学与工程,2015,31(1):83-87. Lang Huang, Haigang Wang, Qingwen Wang. Influence of β Nucleating Agent on the Crystallization and Mechanical Properties of PP /Wood Flour Composites[J]. Polymer Materials Science & Engineering,2015,31(1):83-87.

复制
文章指标
  • 点击次数:
  • 下载次数:
  • HTML阅读次数:
  • 引用次数:
历史
  • 收稿日期:
  • 录用日期:
  • 网络出版日期:
  • 在线发布日期: 2015-02-01
  • 出版日期:
您是第      位访问者
编辑出版 :《高分子材料科学与工程》编辑部
地址 :四川省成都市一环路南一段24号 四川大学高分子研究所
电话 :028-8540 1653  E-mail:gfzclbjb@vip.sina.com
高分子材料科学与工程 ® 2026 版权所有
技术支持:北京勤云科技发展有限公司