超声外场对复合材料注射成型流动行为影响的可视化实验
DOI:
作者:
作者单位:

作者简介:

通讯作者:

中图分类号:

基金项目:

国家自然科学基金资助项目(51175060);973计划项目(2012CB025905);辽宁省科技创新重大专项(201303008)


Visual Experiment of the Effect of Ultrasonic Field on Melt Filling Flow Behavior in the Composite Materials
Author:
Affiliation:

Fund Project:

  • 摘要
  • |
  • 图/表
  • |
  • 访问统计
  • |
  • 参考文献
  • |
  • 相似文献
  • |
  • 引证文献
  • |
  • 资源附件
  • |
  • 文章评论
    摘要:

    利用自主研制开发的基于可视化技术的超声激励注射成型装置,对超声频率为19.5 kHz时,不同超声功率、不同注射速度以及不同玻纤含量条件下,短玻纤增强聚丙烯(GF/PP)复合材料熔体前沿充填型腔的状况进行直接观测记录,并对超声外场对复合熔体充型流动行为的影响进行研究。结果表明,超声外场在一定程度上改善了10%GF/PP的熔体充型流动行为,而且最佳超声功率值随着注射速度不同而有所改变,超声外场对于20%GF/PP的熔体充型流动行为改善效果并不明显。为后续研究超声外场对复合材料注塑成型特性的影响可以提供可靠依据。

    Abstract:

    A novel ultrasonic injection molding device based on visualization technology was developed in this study. Using the ultrasonic injection molding device, a series of visualization experiments were conducted to record the filling process of short glass fiber reinforced polypropylene (GF/PP) composites under different ultrasonic power, injection rate and glass fiber content. Subsequently, the effect of ultrasonic field on the filling flow behavior of the composite melts was investigated. The results show that ultrasonic field improves the filling flow behavior of 10% GF/PP to some extent and the optimal ultrasonic power changes with injection rate. But the effect of ultrasonic field on 20% GF/PP is not as obvious as the effect on 10% GF/PP. On the basis of this research, the effect of ultrasonic field on the molding characteristics of composite materials can be studied further.

    参考文献
    相似文献
    引证文献
引用本文

姜开宇, 李豪, 吉智, 于同敏, 王敏杰.超声外场对复合材料注射成型流动行为影响的可视化实验[J].高分子材料科学与工程,2015,31(1):98-102. Kaiyu Jiang, Hao Li, Zhi Ji, Tongmin Yu, Minjie Wang. Visual Experiment of the Effect of Ultrasonic Field on Melt Filling Flow Behavior in the Composite Materials[J]. Polymer Materials Science & Engineering,2015,31(1):98-102.

复制
文章指标
  • 点击次数:
  • 下载次数:
  • HTML阅读次数:
  • 引用次数:
历史
  • 收稿日期:
  • 录用日期:
  • 网络出版日期:
  • 在线发布日期: 2015-02-01
  • 出版日期:
您是第      位访问者
编辑出版 :《高分子材料科学与工程》编辑部
地址 :四川省成都市一环路南一段24号 四川大学高分子研究所
电话 :028-8540 1653  E-mail:gfzclbjb@vip.sina.com
高分子材料科学与工程 ® 2026 版权所有
技术支持:北京勤云科技发展有限公司