柠檬烯U型微乳的构建及水增溶过程中微观结构变化过程模拟
DOI:
作者:
作者单位:

作者简介:

通讯作者:

中图分类号:

基金项目:


Formation of Limonene U-Type Microemulsion and Transition of the Microstructure During Water-Solubilization
Author:
Affiliation:

Fund Project:

  • 摘要
  • |
  • 图/表
  • |
  • 访问统计
  • |
  • 参考文献
  • |
  • 相似文献
  • |
  • 引证文献
  • |
  • 资源附件
  • |
  • 文章评论
    摘要:

    以柠檬烯为油相,吐温80为表面活性剂制备微乳,利用拟三元相图研究不同助表面活性剂及其与表面活性剂的不同比值(Km值)对微乳有效区域的影响。结果发现,当油相与表面活性剂之比小于或等于5∶5时,微乳体系可无限增溶,为U型微乳。采用电导率法、黏度法对U型微乳的水增溶过程进行研究,实验结果发现,当含水量小于40%时,微乳体系为油包水(W/O)型;当含水量为40%~60%时,微乳体系为双连续型;当含水量大于60%时,微乳体系为水包油(O/W)型。利用耗散粒子动力学(DPD)方法对水相增溶过程中微乳体系的微观结构和微乳液滴的形态特征变化进行模拟,模拟结果表明,在水相增溶过程中,微乳体系能够在含水量为40%和60%时发生相的转变,与实验结果较好吻合。

    Abstract:

    The effects of co-surfactant and their ratio (Km values) on formation of microemulsions prepared with limenene as oil phase and Tween 80 as surfactant were investigated through pseudo-ternary phase diagrams, conductivity, viscosity, and the microstructure transition of microemulsion system during water solublization was studied by dissipative particle dynamics (DPD) simulation. The results show that when the Km value is or less than 5∶5, the water phase could be diluted infinitely, and the system is characterized as U-type microemulsion. Water/oil, bio-continuous and oil/water microemulsion is formed when the water content is <40%, 40%~60%, and >60%, respectively. The DPD simulation results show that microstructure would be transformed at the water content range of 40% or 60% during the water solubilization process. The simulated results agree well with experimental counterparts.

    参考文献
    相似文献
    引证文献
引用本文

李璐, 肖南, 田一农, 李雁, 解新安.柠檬烯U型微乳的构建及水增溶过程中微观结构变化过程模拟[J].高分子材料科学与工程,2015,31(1):108-114. Lu Li, Nan Xiao, Yinong Tian, Yan Li, Xin’an Xie. Formation of Limonene U-Type Microemulsion and Transition of the Microstructure During Water-Solubilization[J]. Polymer Materials Science & Engineering,2015,31(1):108-114.

复制
文章指标
  • 点击次数:
  • 下载次数:
  • HTML阅读次数:
  • 引用次数:
历史
  • 收稿日期:
  • 录用日期:
  • 网络出版日期:
  • 在线发布日期: 2015-02-01
  • 出版日期:
您是第      位访问者
编辑出版 :《高分子材料科学与工程》编辑部
地址 :四川省成都市一环路南一段24号 四川大学高分子研究所
电话 :028-8540 1653  E-mail:gfzclbjb@vip.sina.com
高分子材料科学与工程 ® 2026 版权所有
技术支持:北京勤云科技发展有限公司