一种基于分子链段长度的微观黏度模型
DOI:
作者:
作者单位:

作者简介:

通讯作者:

中图分类号:

基金项目:

国家自然科学基金资助项目(51175348);深圳市科技计划基础项目(JCYJ20120917163755066)


A Micro-Viscosity Model Based on the Molecular Chain Length
Author:
Affiliation:

Fund Project:

  • 摘要
  • |
  • 图/表
  • |
  • 访问统计
  • |
  • 参考文献
  • |
  • 相似文献
  • |
  • 引证文献
  • |
  • 资源附件
  • |
  • 文章评论
    摘要:

    考虑分子链段长度(MCL),修正Cross-Law宏观黏度模型,建立反映微尺度流动特性的MCL微观黏度模型。通过PP材料80 μm,70 μm和200 μm薄板注塑填充率实验和ABS材料边长200 μm,300 μm方柱注塑压力差实验,验证了新建微观黏度模型MCL的有效性和精度。同时发现随着特征尺寸的减小,薄板注塑的MCL微观黏度模型的模拟填充率要比宏观黏度模型更加趋近于实验数据,特征尺寸为70 μm时平均误差降低为12.12%;在压力差实验中,随着剪切速率的提高,MCL微观黏度模型的模拟压力差更趋近于实测数据。

    Abstract:

    According to the traditional Cross-Law model, a new micro-scale viscosity model (MCL model, molecular chain length model) was established based on the molecular chain length. The model was verified by comparing the micro injection experimental filling ratio of the 80 μm, 70 μm and 200 μm thick sheets with the simulation filling ratio, and by comparing the micro injection experimental pressure difference of the length of 200 μm and 300 μm square column with the simulation pressure difference, respectively. The results show that with decreasing the feature size, the simulation filling rate of the MCL microscopic model is largely closer to the experimental data than the macroscopic model. When the feature size is 70 μm, the average error is down to 12.12%. Meanwhile, in micro injection experimental pressure difference, with increasing the shear rate, the simulation pressure difference of the MCL microscopic model is closer to the experimental date than the macroscopic model.

    参考文献
    相似文献
    引证文献
引用本文

娄燕, 裴九龙, 何培乾.一种基于分子链段长度的微观黏度模型[J].高分子材料科学与工程,2015,31(1):126-132. Yan Lou, Jiulong Pei, Peiqian He. A Micro-Viscosity Model Based on the Molecular Chain Length[J]. Polymer Materials Science & Engineering,2015,31(1):126-132.

复制
文章指标
  • 点击次数:
  • 下载次数:
  • HTML阅读次数:
  • 引用次数:
历史
  • 收稿日期:
  • 录用日期:
  • 网络出版日期:
  • 在线发布日期: 2015-02-01
  • 出版日期:
您是第      位访问者
编辑出版 :《高分子材料科学与工程》编辑部
地址 :四川省成都市一环路南一段24号 四川大学高分子研究所
电话 :028-8540 1653  E-mail:gfzclbjb@vip.sina.com
高分子材料科学与工程 ® 2026 版权所有
技术支持:北京勤云科技发展有限公司