Abstract:The phosphazene-sulphone microspheres (PZS) and hexaphenoxytricyclophosphazene (HPCP) were synthesized by precipitation polymerization and nucleophile substituting reaction, respectively, and the cable insulation materials of HPCP or PZS modified LDPE were prepared. For HPCP/LDPE materials,with increase of the HPCP content from 0% to 7%, limited oxygen index(LOI) increases from 17 to 22, and smoke density(Ds) increases slightly and Ds of 5% HPCP filled LDPE reaches the lowest value of 170, and the tensile strength and elongation at break decrease 10%. For PZS/LDPE materials, with increase of the PZS content up to 5%, LOI increases to 21, and Ds decreases gradually and Ds of 5% PZS filled LDPE reduces to the lowest value of 140; and the tensile strength and elongation at break increase firstly then decrease, the tensile strength of 5% HPCP filled LDPE decreases 10% and its elongation at break is greater than that of pure LDPE. For both types of filled LDPE, their resistivity decreases slightly with increasing the content of HPCP or PZS and the resistivity with 7% HPCP reduces to the lowest value of 2.1×1014Ω·cm, still can accord requirements.