非球形的剑麻纤维素纳米晶须稳定Pickering乳液的制备及稳定因素探讨
DOI:
作者:
作者单位:

作者简介:

通讯作者:

中图分类号:

基金项目:

国家自然科学基金资助项目(21204013,21264005);广西自然科学基金资助项目(2012GXNSFBA053153,2013GXNSFDA019008);广西矿冶与环境科学实验中心(KH2012YB001);大学生创新创业项目(CLXY004)


Fabrication and Factors of Stabilization of Pickering Emulsion Based on Cellulose Nanowhiskers Extracted from Sisal Fiber
Author:
Affiliation:

Fund Project:

  • 摘要
  • |
  • 图/表
  • |
  • 访问统计
  • |
  • 参考文献
  • |
  • 相似文献
  • |
  • 引证文献
  • |
  • 资源附件
  • |
  • 文章评论
    摘要:

    首先利用硫酸酸解剑麻微晶来制备剑麻纤维素纳米晶须(SCNW),继而通过非球形的SCNW来稳定环氧氯丙烷(EPC)/水型Pickering乳液。研究了SCNW的用量、水油体积比及超声时间等因素对SCNW稳定的EPC/水型Pickering乳液的稳定性、结构和形貌的影响。结果表明,当SCNW的量和水油体积比大于1时,SCNW才能稳定EPC/水型Pickering乳液。并且随着SCNW用量的增多、水油体积比的增大,EPC/水型乳液体系中乳滴的粒径越小,而超声乳化时间对乳滴粒径大小则没有多大影响。

    Abstract:

    Sisal cellulose nanowhiskers (SCNW) were fabricated by the sulphuric acid acidolysis method. The obtained unspherical SCNW were used to stabilize epichlorohydrin (EPC)/water Pickering emulsion. The effect of the SCNW concentration in aqueous dispersion, volume ratio of water to oil and ultrasonic time on stability, structure and morphology of the EPC/water Pickering emulsion was studied. The results show that only when the content of SCNW in aqueous dispersion and volume ratio of water to oil are appropriate and enough, SCNW can stabilize and form EPC/water Pickering emulsion. Meanwhile, with increase of the SCNW concentration and volume ratio of water to oil, the droplet diameter of EPC/water Pickering emulsion decreases. The ultrasonic time has no effect on the diameter of the emulsion droplets.

    参考文献
    相似文献
    引证文献
引用本文

胡盼盼, 覃倩伊, 刘红霞, 韦春, 吕建.非球形的剑麻纤维素纳米晶须稳定Pickering乳液的制备及稳定因素探讨[J].高分子材料科学与工程,2015,31(1):175-179. Panpan Hu, Qianyi Qin, Hongxia Liu, Chun Wei, Jian Lü. Fabrication and Factors of Stabilization of Pickering Emulsion Based on Cellulose Nanowhiskers Extracted from Sisal Fiber[J]. Polymer Materials Science & Engineering,2015,31(1):175-179.

复制
文章指标
  • 点击次数:
  • 下载次数:
  • HTML阅读次数:
  • 引用次数:
历史
  • 收稿日期:
  • 录用日期:
  • 网络出版日期:
  • 在线发布日期: 2015-02-01
  • 出版日期:
您是第      位访问者
编辑出版 :《高分子材料科学与工程》编辑部
地址 :四川省成都市一环路南一段24号 四川大学高分子研究所
电话 :028-8540 1653  E-mail:gfzclbjb@vip.sina.com
高分子材料科学与工程 ® 2026 版权所有
技术支持:北京勤云科技发展有限公司