双酚A 型聚芳醚酮合成的工艺条件
DOI:
作者:
作者单位:

作者简介:

通讯作者:

中图分类号:

基金项目:


Technological Conditions for Synthesis of Poly (Aryl Ether Ketone) Containing Bisphenol A
Author:
Affiliation:

Fund Project:

  • 摘要
  • |
  • 图/表
  • |
  • 访问统计
  • |
  • 参考文献
  • |
  • 相似文献
  • |
  • 引证文献
  • |
  • 资源附件
  • |
  • 文章评论
    摘要:

    采用一种工艺简单、反应时间短、能耗低的合成工艺合成双酚A型聚芳醚酮。研究了单体配比、聚合反应时间、反应物浓度、溶剂对聚合反应的影响,最终确定合适的反应条件:单体摩尔比为1∶1,聚合反应时间为2.5h,溶剂为N-甲基吡咯烷酮,固含量为25%。同时研究了单体配比对聚合物热性能的影响,当单体摩尔比为1∶1时,聚合物的玻璃化转变温度和热失重温度都较高。

    Abstract:

    Poly (aryl ether ketone) containing bisphenol A (BPA) was synthesized through a simple technology with the advantage of short reaction time, low energy consumption. The effects of the monomer ratio , polymerization reaction time, concentration, solvent on the polymerization were studied. The appropriate reaction conditions were determined, such as the monomer ratio of 1∶1, the polymerization reaction time of 2.5h, N-methyl pyrrolidone as solvent, and the solid content of 25%. The effects of the monomer ratio on thermal properties of the polymer were also studied. When the monomer mole ratio is 1∶1, the glass transition temperature of the polymer and mass loss temperature are higher.

    参考文献
    相似文献
    引证文献
引用本文

赵晓刚,龚 维,冀克俭,邓卫华,周 彤,李艳玲.双酚A 型聚芳醚酮合成的工艺条件[J].高分子材料科学与工程,2015,31(2):1-4. Xiaogang Zhao, Wei Gong, Kejian Ji, Weihua Deng, Tong Zhou, Yanling Li. Technological Conditions for Synthesis of Poly (Aryl Ether Ketone) Containing Bisphenol A[J]. Polymer Materials Science & Engineering,2015,31(2):1-4.

复制
文章指标
  • 点击次数:
  • 下载次数:
  • HTML阅读次数:
  • 引用次数:
历史
  • 收稿日期:
  • 录用日期:
  • 网络出版日期:
  • 在线发布日期: 2015-02-23
  • 出版日期:
您是第      位访问者
编辑出版 :《高分子材料科学与工程》编辑部
地址 :四川省成都市一环路南一段24号 四川大学高分子研究所
电话 :028-8540 1653  E-mail:gfzclbjb@vip.sina.com
高分子材料科学与工程 ® 2026 版权所有
技术支持:北京勤云科技发展有限公司