巴比妥与4-乙烯基吡啶分子印迹聚合物的设计及性能评价
DOI:
作者:
作者单位:

作者简介:

通讯作者:

中图分类号:

基金项目:

国家自然科学基金资助项目(21302062);吉林省科技厅发展计划项目(20150101018JC);吉林省教育厅科学技术项目(201359);吉林省科技发展计划项目(20130206099SF)


Design and Properties of Barbital Imprinting System with 4-Vinylpyridine as Functional Monomer
Author:
Affiliation:

Fund Project:

  • 摘要
  • |
  • 图/表
  • |
  • 访问统计
  • |
  • 参考文献
  • |
  • 相似文献
  • |
  • 引证文献
  • |
  • 资源附件
  • |
  • 文章评论
    摘要:

    采用量子化学密度泛函理论(DFT)的M062X/6-31G(d,p)方法,模拟巴比妥(BAR)印迹分子与4-乙烯基吡啶(4-Vpy)功能单体的相互作用,确定BAR与4-Vpy的最佳印迹比例为1∶3。然后,在60 ℃乙腈中采用1∶3印迹比例合成巴比妥分子印迹聚合物(BAR-MIPs),并对BAR-MIPs微球形貌、印迹识别性能及选择性能等进行表征。结果表明,BAR-MIPs为微球形状,粒径在120~390nm 之间;Scatchard分析表明,在研究的浓度范围内MIPs对模板BAR的结合位点是等价的,其离解平衡常数(Kd)与最大表观结合量(Qmax)分别为29.1mg/L和13.1mg/g;BAR-MIPs对BAR的吸附量明显高于其对1,3-二甲基巴比妥酸(DMBA)、2-硫代巴比妥酸(TMB)及戊巴比妥钠(PBS)的吸附量,表现出较强的特异性吸附能力。

    Abstract:

    The simulation of interaction processes between barbital (BAR) and 4-vinylpyridine (4-Vpy) were performed basing on the density functional theory of M062X/6-31G(d,p). The excellent imprinting ratio is 1∶3 between BAR and 4-Vpy. The BAR molecular imprinted polymer microspheres (BAR-MIPs) were synthesized by precipitation polymerization. The SEM photographs, the adsorption efficiency, and FT-IR were employed to demonstrate the particle size distribution, properties, and the mechanism of interaction. The experimental results indicate that the diameter of BAR-MIPs is ranging from 120 nm to 390 nm. Analysis of the Scatchard plot reveals that the binding sites of BAR-MIPs to BAR are equal class within the studied concentration range,and the dissociation constant (Kd) and apparent maximum adsorption quantity (Qmax) of BAR-MIPs are 29.1 mg/L and 13.1 mg/g, respectively. The study of selective adsorption shows that BAR-MIPs has higher selectivity for BAR than for 1,3-dimethyl barbituric acid (DMBA), 2-thiobarbituric acid (TMB), and pelltobarbitalum natricum (PBS).

    参考文献
    相似文献
    引证文献
引用本文

苏婷婷,刘俊渤,唐珊珊,靳瑞发.巴比妥与4-乙烯基吡啶分子印迹聚合物的设计及性能评价[J].高分子材料科学与工程,2015,31(2):5-10. Tingting Su, Junbo Liu, Shanshan Tang, Ruifa Jin. Design and Properties of Barbital Imprinting System with 4-Vinylpyridine as Functional Monomer[J]. Polymer Materials Science & Engineering,2015,31(2):5-10.

复制
文章指标
  • 点击次数:
  • 下载次数:
  • HTML阅读次数:
  • 引用次数:
历史
  • 收稿日期:
  • 录用日期:
  • 网络出版日期:
  • 在线发布日期: 2015-02-23
  • 出版日期:
您是第      位访问者
编辑出版 :《高分子材料科学与工程》编辑部
地址 :四川省成都市一环路南一段24号 四川大学高分子研究所
电话 :028-8540 1653  E-mail:gfzclbjb@vip.sina.com
高分子材料科学与工程 ® 2026 版权所有
技术支持:北京勤云科技发展有限公司