AGET-ATRP乳液聚合法合成含氟两亲性嵌段聚合物
DOI:
作者:
作者单位:

作者简介:

通讯作者:

中图分类号:

基金项目:


Preparation of Fluorine-Containing Amphiphilic Block Copolymer by AGET-ATRP Emulsion Copolymerization
Author:
Affiliation:

Fund Project:

  • 摘要
  • |
  • 图/表
  • |
  • 访问统计
  • |
  • 参考文献
  • |
  • 相似文献
  • |
  • 引证文献
  • |
  • 资源附件
  • |
  • 文章评论
    摘要:

    采用电子活化再生原子转移自由基(AGET-ATRP)乳液聚合的方法合成了含氟两亲性嵌段聚合物乳液。用红外光谱、核磁共振氢谱和氟谱、X射线光电子能谱对其结构进行分析,发现所有单体参与了反应,产物呈现共聚物结构。接触角测量结果显示,含氟两亲性嵌段聚合物处理岩心后,蒸馏水、油田污水、十六烷、原油的接触角分别由0.70°,0.75°,1.60°和36.83°增加到126.10°,110.51°,97.98°和103.51°,表明聚合物可以改变岩心的润湿性,由强液湿转变为气湿。毛细管上升实验结果表明,合成的聚合物可以使气/水体系和油/气体系中的接触角分别由60°和32°增加到118.31°和77.98°。渗吸实验结果表明,含氟两亲性嵌段聚合物处理岩心后,气/水体系和油/气体系中的液体饱和度明显降低,分别由59%和53.9%降低为35.6%和22.6%。

    Abstract:

    The fluorine-containing amphiphilic block copolymer emulsion was prepared through atom transfer radical polymerization using activators regenerated by electron transfer (AGET-ATRP) emulsion copolymerization. The structure of the copolymer was determined by FT-IR, 1H-NMR and 19F-NMR, X-ray photoelectron spectroscopy (XPS). The results show that all the monomers were polymerized. After the rock was treated with the emulsion, the contact angles of distilled water, oilfield sewage, hexadecane and crude oil increase from 0.70°, 0.75°, 1.60° and 36.83° to 126.10°, 110.51°, 97.98° and 103.51°, respectively. And it is also showed that the rock wettability is altered from strong liquid-wetting to gas-wetting. The results of capillary rise tests indicate that the emulsion could change the contact angles of water/air and oil/air systems from 60° and 32° to 118.31° and 77.98°, respectively. The liquid imbibition in both gas/water and water/oil systems pronouncedly decreases from 59% and 53.9% to 35.6% and 22.6%, respectively after treatment with the fluorine-containing amphiphilic block copolymer emulsion.

    参考文献
    相似文献
    引证文献
引用本文

冯春燕. AGET-ATRP乳液聚合法合成含氟两亲性嵌段聚合物[J].高分子材料科学与工程,2015,31(2):11-15. Chunyan Feng. Preparation of Fluorine-Containing Amphiphilic Block Copolymer by AGET-ATRP Emulsion Copolymerization[J]. Polymer Materials Science & Engineering,2015,31(2):11-15.

复制
文章指标
  • 点击次数:
  • 下载次数:
  • HTML阅读次数:
  • 引用次数:
历史
  • 收稿日期:
  • 录用日期:
  • 网络出版日期:
  • 在线发布日期: 2015-02-23
  • 出版日期:
您是第      位访问者
编辑出版 :《高分子材料科学与工程》编辑部
地址 :四川省成都市一环路南一段24号 四川大学高分子研究所
电话 :028-8540 1653  E-mail:gfzclbjb@vip.sina.com
高分子材料科学与工程 ® 2026 版权所有
技术支持:北京勤云科技发展有限公司