醇类共溶剂对聚丙烯酸酯/SiO2 杂化涂层表面形貌和性能的影响
DOI:
作者:
作者单位:

作者简介:

通讯作者:

中图分类号:

基金项目:

国家自然科学基金资助项目(21446007);广东省大学生创新创业训练项目(1181913013)


Effects of Alcohol Co-Solvents on the Surface Morphology and Properties of Polyacrylate/SiO2 Hybrid Films
Author:
Affiliation:

Fund Project:

  • 摘要
  • |
  • 图/表
  • |
  • 访问统计
  • |
  • 参考文献
  • |
  • 相似文献
  • |
  • 引证文献
  • |
  • 资源附件
  • |
  • 文章评论
    摘要:

    通过共混法制备了聚丙烯酸酯/SiO2(PA/SiO2)杂化乳液,在成膜过程中添加醇类共溶剂,驱使杂化乳液在成膜过程发生溶胶-凝胶反应;研究了醇类共溶剂种类对涂层性能的影响。结果显示,选用异丙醇作共溶剂时,交联度从65%提高到88%,而硬度从0.71提高到0.86,涂膜的综合性能最佳。采用傅里叶变换红外光谱、扫描电镜和原子力显微镜表征涂层表面结构时,发现功能聚合物与硅溶胶间发生溶胶-凝胶反应,并在涂层表面形成了聚合物-SiO2 和Si-O-Si交联骨架,使得SiO2 颗粒均匀分布于涂层中,提高了杂化涂层的热稳定性。

    Abstract:

    Polyacrylate/SiO2 hybrid emulsions were prepared by directly mixing method. Sol-gel reactions were induced by addition of alcohol solvent during film-formation. The effects of alcohol solvent categories on the properties of hybrid films were studied. The results indicate that the hybrid films display better properties with addition of isopropanol, and the crosslinking degree and hardness are increased up to 88% and 0.86, respectively. The surface structure of hybrid films were characterized by Fourier transform infrared spectroscopy (FT-IR), scanning electron microscope (SEM) and atomic force microscope (AFM). It is found that the sol-gel reactions between colloidal silica and functionalized polyacrylate are carried out to build polymer-SiO2 and Si-O-Si crosslinking networks on the surface and the thermal stability is improved.

    参考文献
    相似文献
    引证文献
引用本文

廖文波,程文雪,张 妮,瞿金清.醇类共溶剂对聚丙烯酸酯/SiO2 杂化涂层表面形貌和性能的影响[J].高分子材料科学与工程,2015,31(2):56-60. Wenbo Liao, Wenxue Cheng, Ni Zhang, Jinqing Qu. Effects of Alcohol Co-Solvents on the Surface Morphology and Properties of Polyacrylate/SiO2 Hybrid Films[J]. Polymer Materials Science & Engineering,2015,31(2):56-60.

复制
文章指标
  • 点击次数:
  • 下载次数:
  • HTML阅读次数:
  • 引用次数:
历史
  • 收稿日期:
  • 录用日期:
  • 网络出版日期:
  • 在线发布日期: 2015-02-23
  • 出版日期:
您是第      位访问者
编辑出版 :《高分子材料科学与工程》编辑部
地址 :四川省成都市一环路南一段24号 四川大学高分子研究所
电话 :028-8540 1653  E-mail:gfzclbjb@vip.sina.com
高分子材料科学与工程 ® 2026 版权所有
技术支持:北京勤云科技发展有限公司